To find out the information that your looking for try lspci -a and lspci -n HTH Don --- Vittorio <[EMAIL PROTECTED]> wrote: > I've installed and compiled the pcmcia source coming > with Bunk's stuff > under potato and kernel 2.4.9 (of course enabling > pcmcia in the > kernel). Then I've installed pcmcia-cs. > > Now when I start pcmcia service with two cards > inserted (a modem and an ethernet card) the answer > is as follows: > > debian:/home/dada# /etc/init.d/pcmcia start > Starting PCMCIA services: > modules/lib/modules/2.4.9/pcmcia/i82365.o: > init_module: No such device > Hint: insmod errors can be caused by incorrect > module parameters, including invalid IO or IRQ > parameters > /lib/modules/2.4.9/pcmcia/ds.o: init_module: > Operation not permitted > Hint: insmod errors can be caused by incorrect > module parameters, including invalid IO or IRQ > parameters > cardmgr. > > What's going wrong? > How can I detect what io port and irq is used by > pcmcia and what should I set to have the pcmcia > work? > > Vittorio > > > > -- > To UNSUBSCRIBE, email to > [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED] >
__________________________________________________ Do You Yahoo!? Make a great connection at Yahoo! Personals. http://personals.yahoo.com