I have been trying to set things up with a DVD on hdc and
a CD-burner on hdd using modules, but without success.
I am using Debian/unstable with kernel 2.4.20 configured in
the same way as the Debian package kernel-image-2.4.20-686,
that is with a highly modular kernel. I am willing to
believe that things might work more easily if I compiled
in support for the DVD and CD-burners, but for the present
I am stubborn and would like to make it work with modules.
Although the DVD-drive works as expected, the CD-burner
does not work properly. For example,
[EMAIL PROTECTED]:~$ su
Password:
viszla:/home/conrad# cdrecord -scanbus
Cdrecord 2.01a04 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
cdrecord: No such file or directory. Cannot open '/dev/pg*'. Cannot open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root.
cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
cdrecord: Also make sure that you have loaded the sg driver and the driver for
cdrecord: SCSI hardware, eg. ide-scsi if you run IDE/ATAPI drives over
cdrecord: ide-scsi emulation. Read /usr/share/doc/cdrecord/README.ATAPI.setup!
-------------------------------------------
My modules:
Module Size Used by Not tainted
sg 33132 0 (unused)
ide-scsi 8848 0
ide-cd 30596 0
cdrom 29600 0 [ide-cd]
scsi_mod 94804 2 [sg ide-scsi]
reiserfs 182544 2 (autoclean)
isofs 26548 0 (autoclean)
vfat 10860 0 (autoclean)
fat 32760 0 (autoclean) [vfat]
ext2 35616 0 (autoclean)
ext3 65408 0 (autoclean)
jbd 42368 0 (autoclean) [ext3]
ide-disk 12704 3 (autoclean)
ide-probe-mod 9808 0 (autoclean)
ide-mod 173608 3 (autoclean) [ide-scsi ide-cd ide-disk ide-probe-mod]
--------------------------------------------
Boot messages:
Kernel command line: root=/dev/hda6 hdd=ide-scsi ignore=hdd
--
SIS5513: IDE controller on PCI bus 00 dev 15
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SiS5513
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST380021A, ATA DISK drive
hdc: SAMSUNG DVD-ROM SD-616T, ATAPI CD/DVD-ROM drive
hdd: LITE-ON LTR-40125S, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=155061/16/63
Partition check:
/dev/ide/host0/bus0/target0/lun0: [PTBL] [9729/255/63] p1 p2 p3 p4 < p5 p6 p7 p8 p9
p10 p11 p12 >
Journalled Block Device driver loaded
VFS: Can't find ext3 filesystem on dev ide0(3,6).
VFS: Can't find ext2 filesystem on dev ide0(3,6).
FAT: bogus logical sector size 0
VFS: Can't find a valid FAT filesystem on dev 03:06.
Unable to identify CD-ROM format.
reiserfs: checking transaction log (device 03:06) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
Adding Swap: 2048248k swap-space (priority -1)
Real Time Clock Driver v1.10e
SCSI subsystem driver Revision: 1.00
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.12
hdd: ATAPI 48X CD-ROM CD-R/RW drive, 1984kB Cache
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
