try running xcdroast and seeing if you can get that setup and working first.
----- Original Message ----- From: "Patrik Modesto" <[EMAIL PROTECTED]> To: <debian-user@lists.debian.org> Sent: Tuesday, December 18, 2001 1:29 PM Subject: cdrecord problems > Hi, > I'm out of ideas, so I need Your help. I'm trying to write some files to > CD-RW, but without success. :-( I'm using Debian Woody (daily updated), > with custom kernel 2.4.16 (enabled scsi emulation, reiserfs, ext3). I > tried everything I found in CD-Writing howto, but still no good. Only > few Kb gets on CD. Dummy mode is off. Funny is, that I can do fast-erase > of CD-RW disk. Full-erase freezes whole Gnome. :-( > Can someone help? > > Thanks > > Patrik > > Here is some info: > > cdrecord -scanbus: > ----------------- > Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling > Linux sg driver version: 3.1.20 > Using libscg version 'schily-0.5' > scsibus0: > 0,0,0 0) 'IOMEGA ' 'ZIP 100 ' '14.A' Removable > Disk > 0,1,0 1) 'PLEXTOR ' 'CD-R PX-W1610A' '1.04' > Removable CD-ROM > 0,2,0 2) * > 0,3,0 3) * > 0,4,0 4) * > 0,5,0 5) * > 0,6,0 6) * > 0,7,0 7) * > > > gcombust - cdrecord output: > -------------------------- > Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling > TOC Type: 1 = CD-ROM > Using libscg version 'schily-0.5' > Driveropts: 'burnproof' > atapi: 1 > Device type : Removable CD-ROM > Version : 0 > Response Format: 1 > Vendor_info : 'PLEXTOR ' > Identifikation : 'CD-R PX-W1610A' > Revision : '1.04' > Device seems to be: Generic mmc CD-RW. > Using generic SCSI-3/mmc CD-R driver (mmc_cdr). > Driver flags : SWABAUDIO > Drive buf size : 1190112 = 1162 KB > FIFO size : 4194304 = 4096 KB > Track 01: data 126 MB padsize: 30 KB > Lout start: 145 MB (14:25/12) = 64737 sectors > Current Secsize: 2048 > ATIP info from disk: > Indicated writing power: 6 > Reference speed: 0 > Is not unrestricted > Is erasable > ATIP start of lead in: -11078 (97:34/22) > ATIP start of lead out: 359849 (79:59/74) > speed low: 0 speed high: 4 > power mult factor: 3 5 > recommended erase/write power: 3 > A2 values: 5C C6 26 > Disk type: Phase change > Manuf. index: 11 > Manufacturer: Mitsubishi Chemical Corporation > Blocks total: 359849 Blocks current: 359849 Blocks > remaining: 295112 > Starting to write CD/DVD at speed 4 in write mode > for single session. > scsidev: '0,1,0' > scsibus: 0 target: 1 lun: 0 > Linux sg driver version: 3.1.20iCdrecord 1.10 > (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg > Schilling > TOC Type: 1 = CD-ROM > Using libscg version 'schily-0.5' > Driveropts: 'burnproof' > atapi: 1 > Device type : Removable CD-ROM > Version : 0 > Response Format: 1 > Vendor_info : 'PLEXTOR ' > Identifikation : 'CD-R PX-W1610A' > Revision : '1.04' > Device seems to be: Generic mmc CD-RW. > Using generic SCSI-3/mmc CD-R driver (mmc_cdr). > Driver flags : SWABAUDIO > Drive buf size : 1190112 = 1162 KB > FIFO size : 4194304 = 4096 KB > Track 01: data 126 MB padsize: 30 KB > Lout start: 145 MB (14:25/12) = 64737 sectors > Current Secsize: 2048 > ATIP info from disk: > Indicated writing power: 6 > Reference speed: 0 > Is not unrestricted > Is erasable > ATIP start of lead in: -11078 (97:34/22) > ATIP start of lead out: 359849 > (79:59/74) > speed low: 0 speed high: 4 > power mult factor: 3 5 > recommended erase/write power: 3 > A2 values: 5C C6 26 > Disk type: Phase change > Manuf. index: 11 > Manufacturer: Mitsubishi > Chemical Corporation > Blocks total: 359849 Blocks > current: 359849 Blocks > remaining: 295112 > Starting to write CD/DVD at > speed 4 in write mode for single > session. > scsidev: '0,1,0' > scsibus: 0 target: 1 lun: 0 > Linux sg driver version: 3.1.20 > Performing OPC... > /usr/bin/cdrecord: Turning > BURN-Proof on > > /usr/bin/cdrecord: Input/output > error. write_g1: scsi sendcmd: > retryable error > CDB: 2A 00 00 00 00 1F 00 00 1F > 00 > status: 0x0 (GOOD STATUS) > cmd finished after 0.933s > timeout 40s > Track 01: 0 of 126 MB written. > write track data: error after > 63488 bytes > Trouble flushing the cache > Writing time: 11.943s > Sense Bytes: 70 00 00 00 00 00 > 00 0A 00 00 00 00 00 00 00 00 00 > 00 > /usr/bin/cdrecord: Input/output > error. flush cache: scsi > sendcmd: no error > CDB: 35 00 00 00 00 00 00 00 00 > 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 70 00 06 00 00 00 > 00 0A 00 00 00 00 29 00 00 00 > Sense Key: 0x6 Unit Attention, > Segment 0 > Sense Code: 0x29 Qual 0x00 > (power on, reset, or bus device > reset occurred) Fru 0x0 > Sense flags: Blk 0 (not valid) > cmd finished after 0.000s > timeout 120s > /usr/bin/cdrecord: fifo had 65 > puts and 2 gets. > /usr/bin/cdrecord: fifo was 0 > times empty and 1 times full, > min fill was 98%. > > /var/log/messages: > ----------------- > Dec 18 19:18:16 mody kernel: hdd: status error: status=0x58 { DriveReady > SeekComplete DataRequest } > Dec 18 19:18:16 mody kernel: hdd: drive not ready for command > Dec 18 19:18:16 mody kernel: hdd: status error: status=0x58 { DriveReady > SeekComplete DataRequest } > Dec 18 19:18:16 mody kernel: hdd: drive not ready for command > Dec 18 19:18:16 mody kernel: hdd: status error: status=0x58 { DriveReady > SeekComplete DataRequest } > Dec 18 19:18:16 mody kernel: hdd: drive not ready for command > Dec 18 19:18:16 mody kernel: hdd: status error: status=0x58 { DriveReady > SeekComplete DataRequest } > Dec 18 19:18:16 mody kernel: hdd: DMA disabled > Dec 18 19:18:16 mody kernel: hdd: drive not ready for command > Dec 18 19:18:16 mody kernel: hdd: ATAPI reset complete > Dec 18 19:18:16 mody kernel: hdd: status error: status=0x49 { DriveReady > DataRequest Error } > Dec 18 19:18:16 mody kernel: hdd: status error: error=0x04 > Dec 18 19:18:16 mody kernel: hdd: drive not ready for command > Dec 18 19:18:16 mody kernel: hdd: status error: status=0x58 { DriveReady > SeekComplete DataRequest } > Dec 18 19:18:16 mody kernel: hdd: drive not ready for command > Dec 18 19:18:16 mody kernel: hdd: status error: status=0x58 { DriveReady > SeekComplete DataRequest } > Dec 18 19:18:16 mody kernel: hdd: drive not ready for command > Dec 18 19:18:16 mody kernel: hdd: status error: status=0x58 { DriveReady > SeekComplete DataRequest } > Dec 18 19:18:16 mody kernel: hdd: drive not ready for command > Dec 18 19:18:17 mody kernel: hdd: ATAPI reset complete > Dec 18 19:18:17 mody kernel: hdd: status error: status=0x49 { DriveReady > DataRequest Error } > Dec 18 19:18:17 mody kernel: hdd: status error: error=0x04 > Dec 18 19:18:17 mody kernel: hdd: drive not ready for command > Dec 18 19:18:22 mody kernel: hdd: status error: status=0x58 { DriveReady > SeekComplete DataRequest } > Dec 18 19:18:22 mody kernel: hdd: drive not ready for command > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > >