Greetings: I'm running into some problems trying to get an ATX box to really shut off during a shutdown. Originally with 2.2.19 & 2.4.10, it would reboot with 'shutdown -h now' command. Odd and irritating. I built a new kernel with 2.4.17 and now I can get it to actually halt and not reboot, but it doesn't send the ATX the command to shut off the power. Windows however is working fine on the same box.
The chipset is: ' lspci -v | less' Host bridge: Acer Laboratories Inc. [ALi]: Unknown device 1647 (rev 04) Flags: bus master, medium devsel, latency 0 Memory at f0000000 (32-bit, prefetchable) [size=128M] Capabilities: [b0] AGP version 2.0 Capabilities: [a4] Power Management version 1 PCI bridge: Acer Laboratories Inc. [ALi] M5247 (prog-if 00 [Normal decode]) Flags: bus master, slow devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: e7000000-e7dfffff refetchable memory behind bridge: e7f00000-efffffff USB Controller: Acer Laboratories Inc. [ALi] M5237 USB (rev 03) (prog-if 10 [OHCI]) Subsystem: Acer Laboratories Inc. [ALi] M5237 USB Flags: bus master, medium devsel, latency 32, IRQ 9 Memory at e6800000 (32-bit, non-prefetchable) [size=4K] Capabilities: [60] Power Management version 2 any assist greatly appreciated! pls email direct [EMAIL PROTECTED] tatah -- Jaye Inabnit\ARS ke6sls\/A GNU-Debian linux user\/ http://www.qsl.net/ke6sls If it's stupid, but works, it ain't stupid. I SHOUT JUST FOR FUN. Free software, in a free world, for a free spirit. Please Support freedom!