Hi, I have been attemting to shift my display down on my laptop. By default, there is a 1/4 inch of unused display showing at the bottom and the top 1/4 inch is off the top of the screen. This only happens in 800x600 mode. In fact 640x480 mode shows up in the middle of a 800x600 screen size, I.E. large border all the way around instead of using the full screen. Some pertinent info; Latest Debian stable with all patches DFI 7200 TC Laptop 32mb memory ...and from X startx ... (--) SVGA: PCI: Cirrus Logic GD7543 rev 0, Memory @ 0x81000000, 0x80000000 (--) SVGA: clgd7543: LCD display only (--) SVGA: clgd7543: 800x600 TFT-color (18-bit color) LCD detected (**) SVGA: chipset: clgd7543 (**) SVGA: videoram: 1024k (**) SVGA: Using 16 bpp, Depth 16, Color weight: 565 (--) SVGA: Maximum allowed dot-clock: 48.810 MHz (**) SVGA: Mode "800x600": mode clock = 38.500 (--) SVGA: Virtual Resolution set to 800x600 (--) SVGA: SpeedUp code selection modified because virtualX != 1024 (--) SVGA: clgd7543: Using programmable clocks (--) SVGA: cldg7543: Internal memory clock register is 0x1e (Extended RAS) (**) SVGA: clgd7543: Approximate DRAM bandwidth for drawing: 30 of 107 MB/s (--) SVGA: cldg7543: Using linear framebuffer at 0x81000000 (2064MB) (--) SVGA: cldg7543: 88576 bytes off-screen memory available (--) SVGA: cldg7543: Using hardware cursor (--) SVGA: cldg7543: Using accelerator functions (--) SVGA: cldg7543: Using BitBLT engine
I've tried using xvidtune, but it doesn't seem to change my screen at all. So, I need some new suggestions. Thanks, Patrick