I'm trying to get TV working on a machine with an ATI AllInWonder Radeon card. It's a woody system & I copied over a .deb for a 2.4.17 kernel that I have worknig on a machine with a WinTV card. But bttv fails to load :-(
Here's the output of cat /proc/pci: PCI devices found: Bus 0, device 0, function 0: Host bridge: Advanced Micro Devices [AMD] AMD-760 [Irongate] System Controller (rev 19). Master Capable. Latency=32. Prefetchable 32 bit memory at 0xd8000000 [0xdbffffff]. Prefetchable 32 bit memory at 0xde000000 [0xde000fff]. I/O at 0xd000 [0xd003]. Bus 0, device 1, function 0: PCI bridge: Advanced Micro Devices [AMD] AMD-760 [Irongate] AGP Bridge (rev 0). Master Capable. Latency=32. Min Gnt=14. Bus 0, device 7, function 0: ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 64). Bus 0, device 7, function 1: IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 6). Master Capable. Latency=32. I/O at 0xd400 [0xd40f]. Bus 0, device 7, function 2: USB Controller: VIA Technologies, Inc. UHCI USB (rev 26). IRQ 11. Master Capable. Latency=32. I/O at 0xd800 [0xd81f]. Bus 0, device 7, function 3: USB Controller: VIA Technologies, Inc. UHCI USB (#2) (rev 26). IRQ 11. Master Capable. Latency=32. I/O at 0xdc00 [0xdc1f]. Bus 0, device 7, function 4: SMBus: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 64). IRQ 9. Bus 0, device 12, function 0: Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 8). IRQ 10. Master Capable. Latency=32. Min Gnt=2.Max Lat=20. I/O at 0xe000 [0xe01f]. Bus 0, device 12, function 1: Input device controller: Creative Labs SB Live! (rev 8). Master Capable. Latency=32. I/O at 0xe400 [0xe407]. Bus 0, device 15, function 0: Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS) (rev 0). IRQ 11. I/O at 0xe800 [0xe81f]. Bus 1, device 5, function 0: VGA compatible controller: ATI Technologies Inc Radeon QD (rev 0). IRQ 10. Master Capable. Latency=32. Min Gnt=8. Prefetchable 32 bit memory at 0xd0000000 [0xd7ffffff]. I/O at 0xc000 [0xc0ff]. Non-prefetchable 32 bit memory at 0xdd000000 [0xdd07ffff]. And here's dmesg: Linux version 2.4.17 ([EMAIL PROTECTED]) (gcc version 2.95.4 (Debian prerelease)) #1 Sat Jan 26 11:48:28 EST 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) On node 0 totalpages: 131056 zone(0): 4096 pages. zone(1): 126960 pages. zone(2): 0 pages. Kernel command line: auto BOOT_IMAGE=Linux ro root=302 video=vesa:mtrr hdc=ide-scsi ide_setup: hdc=ide-scsi Initializing CPU#0 Detected 1533.404 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 3060.53 BogoMIPS Memory: 513132k/524224k available (1485k kernel code, 10704k reserved, 484k data, 268k init, 0k highmem) Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Before vendor init, caps: 0383f9ff c1cbf9ff 00000000, vendor = 2 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After vendor init, caps: 0383f9ff c1cbf9ff 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383f9ff c1cbf9ff 00000000 00000000 CPU: Common caps: 0383f9ff c1cbf9ff 00000000 00000000 CPU: AMD Athlon(tm) 4 processor stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED]) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfb600, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router VIA [1106/0686] at 00:07.0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x07 (Driver version 1.15) Starting kswapd parport0: PC-style at 0x378 [PCSPP,EPP] parport_pc: Via 686A parallel port: io=0x378 vesafb: framebuffer at 0xd0000000, mapped to 0xe0800000, size 32768k vesafb: mode is 800x600x24, linelength=2400, pages=22 vesafb: protected mode interface info at c000:49dd vesafb: scrolling: redraw vesafb: directcolor: size=0:8:8:8, shift=0:16:8:0 Console: switching to colour frame buffer device 100x37 fb0: VESA VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A lp0: using parport0 (polling). block: 128 slots per queue, batch=32 Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 39 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xd400-0xd407, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xd408-0xd40f, BIOS settings: hdc:DMA, hdd:DMA hda: IC35L040AVER07-0, ATA DISK drive hdc: Hewlett-Packard CD-Writer cd16r, ATAPI CD/DVD-ROM drive hdd: ATAPI-CD ROM-DRIVE-56MAX, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=5005/255/63 hdd: ATAPI 56X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.12 Partition check: hda: hda1 hda2 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker http://www.scyld.com/network/ne2k-pci.html PCI: Found IRQ 11 for device 00:0f.0 PCI: Sharing IRQ 11 with 00:07.2 PCI: Sharing IRQ 11 with 00:07.3 eth0: RealTek RTL-8029 found at 0xe800, IRQ 11, 00:50:BA:52:6A:22. Linux video capture interface: v1.00 Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 439M agpgart: Detected AMD 761 chipset agpgart: AGP aperture is 64M @ 0xd8000000 [drm] Initialized tdfx 1.0.0 20010216 on minor 0 [drm] AGP 0.99 on Unknown @ 0xd8000000 64MB [drm] Initialized radeon 1.1.1 20010405 on minor 1 SCSI subsystem driver Revision: 1.00 request_module[scsi_hostadapter]: Root fs not mounted es1371: version v0.30 time 11:49:51 Jan 26 2002 Creative EMU10K1 PCI Audio Driver, version 0.16, 11:49:46 Jan 26 2002 PCI: Found IRQ 10 for device 00:0c.0 PCI: Sharing IRQ 10 with 01:05.0 emu10k1: EMU10K1 rev 8 model 0x8027 found, IO at 0xe000-0xe01f, IRQ 10 ac97_codec: AC97 Audio codec, id: 0x4352:0x5914 (Cirrus Logic CS4297A rev B) usb.c: registered new driver hub uhci.c: USB Universal Host Controller Interface driver v1.1 PCI: Found IRQ 11 for device 00:07.2 PCI: Sharing IRQ 11 with 00:07.3 PCI: Sharing IRQ 11 with 00:0f.0 uhci.c: USB UHCI at I/O 0xd800, IRQ 11 usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 11 for device 00:07.3 PCI: Sharing IRQ 11 with 00:07.2 PCI: Sharing IRQ 11 with 00:0f.0 uhci.c: USB UHCI at I/O 0xdc00, IRQ 11 usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. reiserfs: checking transaction log (device 03:02) ... Using r5 hash to sort names reiserfs: using 3.5.x disk format ReiserFS version 3.6.25 VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 268k freed Adding Swap: 979956k swap-space (priority -1) i2c-core.o: i2c core module i2c-algo-bit.o: i2c bit algorithm module bttv: driver version 0.7.83 loaded bttv: using 2 buffers with 2080k (4160k total) for capture bttv: Host bridge is Advanced Micro Devices [AMD] AMD-760 [Irongate] System Controller i2c-core.o: i2c core module i2c-core.o: driver tv card mixer driver registered. i2c-viapro.o version 2.6.2 (20011118) i2c-viapro.o: Found Via VT82C686A/B device i2c-core.o: adapter SMBus Via Pro adapter at 5000 registered as adapter 0. i2c-viapro.o: Via Pro SMBus detected and initialized lp0: compatibility mode scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: HP Model: CD-Writer cd16r Rev: OKS1 Type: CD-ROM ANSI SCSI revision: 02 Does anyone have this working? Do I need to specify some options to teh bttv driver? -- "They that would give up essential liberty for temporary safety deserve neither liberty nor safety." -- Benjamin Franklin