Hello all,
A few days ago I installed Woody and since then I have been trying to
get Xwindows running. I've downloaded the appropriate drivers for my
Matrox G450 from the Matrox site and tried the XF86config with various
options, but withous succes. I don't know how to tell XFree86 to use
the mga_hal driver that Matrox supplied (simply putting it in the
place of the 'vga' driver in /etc/X11/XF86Config doesn't quite work).
Also there seems to be a discrepency between the startx logfile (which mentions
the mga_hal driver) and XF86Config (which only mentions the standard 'vga'
driver).
Below I have included my /etc/X11/XF86XConfig and the log produced by
startx with the final failure: 'No screens found' (a pretty common
one, so it seems when I search the net and the archives of this list, but
with varying
cause)
Ideas anyone?
Here's /etc/X11/XF86Config (I edited some comments, but always
mentioned that in [ ]):
--------------------------------------------------------------------------------------------------
# File generated by xf86config.
# [copyright]
**********************************************************************
# Refer to the XF86Config(4/5) man page for details [..]
**********************************************************************
**********************************************************************
# Module section -- [..]
**********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA
extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
# Load "glx"
EndSection
#
**********************************************************************
# Files section. This allows default font and rgb paths to be set
#
**********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# [Fonts..]
# FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
**********************************************************************
# Server flags section.
**********************************************************************
Section "ServerFlags"
#[description of option]
# Option "NoTrapSignals"
#[description of option]
# Option "DontZap"
#[description of option]
# Option "Dont Zoom"
#[description of option]
# Option "DisableVidModeExtension"
#[description of option]
# Option "AllowNonLocalXvidtune"
#[description of option]
# Option "DisableModInDev"
#[description of option]
# Option "AllowNonLocalModInDev"
EndSection
**********************************************************************
# Input devices
**********************************************************************
**********************************************************************
# Core keyboard's InputDevice section
**********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to
"Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with
xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
#[Xkb description and possible settings. Actual settings below]
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "gb"
EndSection
**********************************************************************
# Core Pointer's InputDevice section
**********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
# [Description of option]
# Option "Protocol" "Xqueue"
# [Description of option]
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# [Description of option]
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# [Description of option]
# Option "ChordMiddle"
EndSection
**********************************************************************
# Other input device sections
#[..]
**********************************************************************
#
#[Commented examples of Input devies snipped]
#
**********************************************************************
# Monitor section
#
**********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Daewoo" #[Daewoo CMC-1707B]
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30-69 # [from the manual]
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-120 # [from the manual]
EndSection
**********************************************************************
# Graphics device section
**********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to
override
# the driver's chipset detection, and should not normally be
specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable
driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this
section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a
device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should
not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xf86config:
Section "Device"
Identifier "G450"
Driver "vga"
# unsupported card
#VideoRam 16384
# Insert Clocks lines here if appropriate
EndSection
**********************************************************************
# Screen sections
**********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen
section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "G450"
Monitor "Daewoo"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "640x480" "800x600" "1024x768" "1280x1024"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "640x480" "800x600" "1024x768" "1280x1024"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "640x480" "800x600" "1024x768" "1280x1024"
ViewPort 0 0
EndSubsection
EndSection
#
**********************************************************************
# ServerLayout sections.
#
**********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is
used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and
right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
-------------------------------------------------------------------
startx log:
------------------------------------------------------------------------------------
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches
submitted
to [EMAIL PROTECTED] Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)
XFree86 Version 4.1.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 21 December 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.13 i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Sun Mar 31 14:09:42
2002
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Daewoo CMC-1707B"
(**) | |-->Device "Matrox G450"
(**) |-->Input Device "Generic Keyboard"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) XKB: model: "pc104"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "Generic Mouse"
(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
(**) FontPath set to
"unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(WW) Cannot open APM
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.4
XFree86 XInput driver : 0.2
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.2
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x800100f8, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3099 card 0000,0000 rev 00 class 06,00,00
hdr 00
(II) PCI: 00:01:0: chip 1106,b099 card 0000,0000 rev 00 class 06,04,00
hdr 01
(II) PCI: 00:0c:0: chip 1282,9102 card 3030,5032 rev 31 class 02,00,00
hdr 00
(II) PCI: 00:11:0: chip 1106,3074 card 1106,3074 rev 00 class 06,01,00
hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a
hdr 00
(II) PCI: 00:11:2: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00
hdr 00
(II) PCI: 00:11:3: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00
hdr 00
(II) PCI: 00:11:4: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00
hdr 00
(II) PCI: 00:11:5: chip 1106,3059 card 4005,4710 rev 30 class 04,01,00
hdr 00
(II) PCI: 01:00:0: chip 102b,0525 card 102b,0541 rev 85 class 03,00,00
hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is
set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set)
(II) Bus 1 I/O range:
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe6000000 - 0xe8ffffff (0x3000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe4000000 - 0xe5ffffff (0x2000000) MX[B]
(II) Bus -1: bridge is at (0:17:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is
set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(1:0:0) Matrox MGA G400 AGP rev 133, Mem @ 0xe4000000/25,
0xe6000000/14, 0xe7000000/23
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xea000000 - 0xebffffff (0x2000000) MX[B]E
[1] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]E
[2] -1 0 0xe7000000 - 0xe77fffff (0x800000) MX[B](B)
[3] -1 0 0xe6000000 - 0xe6003fff (0x4000) MX[B](B)
[4] -1 0 0xe4000000 - 0xe5ffffff (0x2000000) MX[B](B)
[5] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]E
[6] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]E
[7] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]E
[8] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]E
[9] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]E
[10] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]E
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xea000000 - 0xebffffff (0x2000000) MX[B]E
[1] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]E
[2] -1 0 0xe7000000 - 0xe77fffff (0x800000) MX[B](B)
[3] -1 0 0xe6000000 - 0xe6003fff (0x4000) MX[B](B)
[4] -1 0 0xe4000000 - 0xe5ffffff (0x2000000) MX[B](B)
[5] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]E
[6] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]E
[7] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]E
[8] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]E
[9] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]E
[10] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]E
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xea000000 - 0xebffffff (0x2000000) MX[B]E
[6] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]E
[7] -1 0 0xe7000000 - 0xe77fffff (0x800000) MX[B](B)
[8] -1 0 0xe6000000 - 0xe6003fff (0x4000) MX[B](B)
[9] -1 0 0xe4000000 - 0xe5ffffff (0x2000000) MX[B](B)
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[12] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]E
[13] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]E
[14] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]E
[15] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]E
[16] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]E
[17] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]E
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.1.9
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "pex5"
(II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
(II) Module pex5: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension X3D-PEX
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension RECORD
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "xie"
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XIE
(II) LoadModule: "mga_hal"
(II) Loading /usr/X11R6/lib/modules/drivers/mga_hal_drv.o
(II) Module mga_hal: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.2
(EE) No drivers available.
Fatal server error:
no screens found
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to [EMAIL PROTECTED]
Ivo Wever
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]