On Tue, May 07, 2002 at 01:38:22PM -0400, Matthew Daubenspeck wrote: > auto eth0 > iface eth0 inet static > address 192.168.0.4 > netmask 255.255.255.0 > network 192.168.0.0 > broadcast 192.168.0.255 > gateway 192.168.0.2 > > iface eth0:0 inet static > address 192.168.0.5 > netmask 255.255.255.0 > network 192.168.0.0 > broadcast 192.168.0.255 > gateway 192.168.0.2 > > But the interface will not up with the 2nd IP at reboot. Any > suggestions? I can always add the ifconfig line to a script I guess...
I have a machine here that works fine with two IP addresses. The /etc/network/interfaces file is the same as yours. but for two differences: There's no 'auto eth0' There's no gateway line for eth0:0 The machine is running potato, and the card is an eepro100. If it still doesn't work, do you get any helpful messages when the network starts? S. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]