Hi Curtis, your procedure seems ok. Can you boot with the previous kernel? If so, look for the messages on booting the new kernel (e. g. /var/log/kern.log) and maybe post these.
Regards, Joachim On Wed, May 08, 2002 at 05:31:04PM -0700, curtis wrote: > Ok, here I go again! > > I am trying to compile a kernel with FreeS/WAN. > > Here are the procedures I have followed, but after completing them on > the reboot my computer starts the loading process and then reboots over > and over, ad nauseam. > > I downloaded FreeSWAN source and kernel-source-2.4.18 > > addgroup [username] src > su [username] > cd /usr/src > tar -xf kernel-source-2.4.18.tar > ln -s kernel-source-2.4.18 linux > export PATCH_THE_KERNEL=YES > cd linux > su root > make-kpkg -config=menuconfig kernel-image > #(at this point I check to make sure IPSEC/FreeSWAN is included under > Networking options) > cd /lib/modules > mv 2.4.18 2.4.18-old > cd /usr/src > dpkg -i kernel-image-2.4.18.xxxx.deb > > > I have done this now four times, but the same results. I have even downloaded > the kernel-source again, just in case something was wrong with it. > -- Joachim Fahnenmüller Lehrer für Mathematik und Physik Herder-Gymnasium Kattowitzer Straße 52 51065 Köln -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]