There is no fixing the problem, the BP6 put the missing SMP functionality of the Celeron processor into the motherboard's chipset, which causes some strangeness. (at least, that's as far as I understand)
I have an identical board and procs, and when I had Linux on it (it has since become the wifey's machine, so it now has .. umm .. that _other_ OS on it), the APIC error seemed to be better or worse with different kernels. I found that the later 2.4.x kernels handled it much better. As far as it spitting out to the console, I seem to remember that that was kernel specific too. Under later kernels, those errors were simply tossed into the kernel log. At which point it was easy to ignore them. You also might want to check and make sure you have the latest BIOS installed. Sean On Sat, 2002-05-18 at 07:52, Frank Brodbeck wrote: > Hello fellows, > I hope, I am right here with my problem. > I'm using Debian unstable i386 on my dual Celeron 533 with a Abit BP6 > Board and I am quite new to smp. I have here these really annoying > > APIC error on CPUn: 0n(0n) > > broadcasting over my consoles. As a matter of fact it's not only > annoying me. When there is high cpu load (mostly when [EMAIL PROTECTED] is > running) there seems to be a random freeze. After consulting google > I made following steps to stop both, freezing and those error messages: > > + reduced cpu voltage from 2.0V to 1.95V with no effect > + shutdown XFree with the effect, that Seti just causes apic errors > and a another error message: > ide_dmaproc : chipset supported ide_dma_lostirq func only : 13 > hdb : lost interrupt > but no freezing > + disabled APM both in BIOS and in kernel with the effect that gkrellm > doesn't shows correct cpu load (not more than 15% on cpu1 and 0% on cpu 2 > while seti is running, not at all...) Also no apic errors occured in 30 > minutes. As I switched from X to console a real flood of apic errors > came over me. > + disabled High-Point onboard IDE controller (which was in any case unused) > > So far from me and my "counter measures". Anybody out here who can > help? I heard of a patch that eliminates the error messages, but doesn't > fix the problem. I really could life with those errors, but not at all > with a random freezing system. > > Best regards, > Frank. > -- > -----BEGIN GEEK CODE BLOCK----- > Version: 3.12 > GO>GC Md- s+:- a-- C++(+) UL++>UL++++$ P+ L+++ E? W++ N* o? > K? w-- O? M- V- PS+ PE(PE-) Y+ PGP>PGP++ t+ 5? X- R++(+++) > tv--@ b+(++) DI?>DI+ D+ G e h! r++>r+++ y+ > ------END GEEK CODE BLOCK------ -- GPG Public Key available: http://sean.gutenpress.org/sean.asc
signature.asc
Description: This is a digitally signed message part
