--- Alvin Oga <[EMAIL PROTECTED]> wrote: > > hi ya patrick > > try using a 2.4.18 kernel w/ raid0/1 built into the kernel > instead of modules.. > > and/or is that initrd referenced in your lilo.conf for "root" > partition > in the lilo.conf stanza > ... > root=/dev/md0 > initrd=that_one_u_used_from_rescue_partition.gz > > c ya > alvin > > > On Sun, 26 May 2002, Patrick Albuquerque wrote: > > > Hi, > > > > I've been struggling to boot into a RAID-1 (mirroring) > > > > o root is hda3, hdc3 as /dev/md0 > > o hda3 & hdc3 have partition type 'fd' > > o root is Ext3 > > o RAID enabled 2.4.18 kernel > > o initrd has raid modules (added 'raid1' to > > /etc/mkinitrd/modules) > > > > dmesg says: > > Journalled Block Device driver loaded > > md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 > > md: raid1 personality registered as nr 3 > > > > but boot fails, and I end up in repair mode with hda3 mounted as > root > > read-only. > > I can mount /dev/md0 from a rescue partition ok. > > > > Any tips? > > > > patrick > > --
I got it working on a kernel with no initrd or modules, which is reassuring but not a long-term solution. I'll play with it some more and try and find what config option I'm missing. Thanks for your suggestion, Alvin. patrick. -- __________________________________________________ Do You Yahoo!? Yahoo! - Official partner of 2002 FIFA World Cup http://fifaworldcup.yahoo.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
