Hi, On Tue, 18 Jun 2002, Thomas Good wrote:
> On Wed, 19 Jun 2002, Sebastiaan wrote: > > > Hello, > > > > I have a problem with my SCSI harddisk/controller which occurs more often > > lately. The errors have the form: > > > > (scsi0:A:1:0): parity error detected in Data-in phase. SEQADDR(0x7c) > > SCSIRATE(0x88) > > > > and are repeatedly printed in the system logs, until the partitions are > > mounted read-only. > > > > > > Usually I have to turn off the computer, press on the SCSI-card (I still > > have the idea that the card is literally broken, but unsure if this is the > > Hallo Sebastiaan, > > If pressing on the card is helpful why not clean the contacts with a > pencil eraser? I've done this cheap trick before. Maybe when you press > on the card it scrapes the contacts enough to get a good connection for > awhile??? Maybe try a diff PCI slot? > Hmm, yes. I have cleaned the slot with some contact spray. I have not tried to put the card into a different slot, since due to bad architecture of my motherboard, I only have to PCI slots where the card can be put in. I hope that it will work better now. <snip> > This is an ultra wide card (2940UW) yes? > I use the same card with a Quantum Atlas II (XP32275W) with no problems. > (Wide SCSI [ non LVD ] connector going to the hdd) > > > Thanks in advance, > > Sebastiaan > Thanks! Sebastiaan > Good luck! (Tot straks!) :^) > > ----------------------------------------------------------------------- > Thomas Good e-mail: [EMAIL PROTECTED] > Programmer/Analyst phone: (+1) 718.818.5528 > Residential Services fax: (+1) 718.818.5056 > Behavioral Health Services, SVCMC-NY mobile: (+1) 917.282.7359 > -- -- > SQL Clinic - An Open Source Clinical Record www.sqlclinic.net > ------------------------------------------------------------------------ > > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
