Em Sex, 2002-06-21 às 16:15, Andy Saxena escreveu: > On Sun, Jun 16, 2002 at 03:28:55PM -0700, Larry Smith wrote: > > I'm unable to find a driver that will load, that is > > supposed to work with my SMC model 8216C internet > > card. The drivers all abort indicating a possible > > address or irq error. > > > > I've tried: > > smc-ultra (Used to work on a RedHat 6.0 system) > > wd > > tulip > > ne
This card has a rtl8139 chip use the rtl8139 module Michel. > > > > I've strapped the card, rather than use plug and play, > > and I know it's at io 0x300 and irq 10. I've tried > > loading with insmod rather than modprobe, so I can > > input these parameters. The required 8390 module is > > already loaded. > > > > Windows 98 on the same computer can find and use the > > card at that address and IRQ. > > > > I even tried working a bit on the driver code to > > hard-wire it, only to discover that apparently I don't > > have the code for the driver that's delivered with > > potato. > > > > Any suggestions? > > > > Here's one. Does your BIOS have a "plug and play" option? If so, turn it > off. > > Also, if this is a new installation you should consider switching to > woody. > > -Andy > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]