On Sat, 09 Jul 2005 01:00:18 +0200, Matthijs <[EMAIL PROTECTED]> wrote:
> I'm trying to get the temperature sensors working on my Debian Sarge > box. The hardware is a VIA Epia M10000 board running a custom compiled > 2.6.8-16 kernel. > > As far as I know, the device driver for the VT1211 chip is not > included in the 2.6.8 kernel, so I followed the instructions on > http://hem.bredband.net/ekmlar/vt1211.html (including adding the two > lines for Debian 2.6.8 kernels). > > Everything, compiling and installing, went correctly - no strange > error messages or anything. > > I've used modconf to configure the modules to be loaded and included > i2c-isa and vt1211. According to the above mentioned webpage, there > should be a directory 0-6000 under /sys/devices/platform/i2c-0, but > unfortunately: > ls -l /sys/devices/platform/i2c-0 > total 0 > -rw-r--r-- 1 root root 4096 Jul 9 00:05 detach_state > -r--r--r-- 1 root root 4096 Jul 9 00:05 name > drwxr-xr-x 2 root root 0 Jul 9 00:05 power > > report from lsmod: > Module Size Used by > vt1211 23108 0 > i2c_sensor 2880 1 vt1211 > via_agp 9056 1 > agpgart 34600 1 via_agp > eth1394 21576 0 > via_rhine 22120 0 > mii 5024 1 via_rhine > ohci1394 35492 0 > ieee1394 111256 2 eth1394,ohci1394 > i2c_isa 1984 0 > i2c_core 24176 3 vt1211,i2c_sensor,i2c_isa > snd_pcm_oss 55080 0 > snd_mixer_oss 20096 1 snd_pcm_oss > snd_via82xx 28644 0 > snd_ac97_codec 69988 1 snd_via82xx > snd_pcm 98728 2 snd_pcm_oss,snd_via82xx > snd_timer 25732 1 snd_pcm > snd_page_alloc 11752 2 snd_via82xx,snd_pcm > snd_mpu401_uart 7968 1 snd_via82xx > snd_rawmidi 25124 1 snd_mpu401_uart > snd_seq_device 8200 1 snd_rawmidi > snd 56388 9 snd_pcm_oss,snd_mixer_oss,snd_via82xx, > > snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart, > snd_rawmidi,snd_seq_device > ipchains 57152 0 > longhaul 8080 0 > ide_cd 42336 0 > cdrom 40700 1 ide_cd > > > So it looks like both modules vt1211 and i2c_isa are loaded (although > i2c_isa doesn't appear to be used), but the directory 0-6000 (supposed > hardware address of i2c) isn't created. > > I've also tried sensors-detect. Final report: > Driver `eeprom' (should be inserted): > Detects correctly: > * Bus `SMBus Via Pro adapter at 0500' > Busdriver `i2c-viapro', I2C address 0x50 > Chip `SPD EEPROM' (confidence: 8) > > Driver `vt1211' (should be inserted): > Detects correctly: > * ISA bus address 0x6000 (Busdriver `i2c-isa') > Chip `VT1211 Super IO Sensors' (confidence: 9) > > Any suggestions what I'm doing wrong here? No suggestions, anyone? -- Matthijs [EMAIL PROTECTED] No need to 'cc' me, I read the list. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]