Hi, This is what I have in my /etc/network/interfaces file:
iface wlan0 inet dhcp wireless_mode managed wireless_essid homenet wireless_key xxxxxxxxxxxxxxxxxxxxxxxxxx name Wireless LAN card Hope this helps, Joe > On Wed, 2005-03-08 at 19:45 +0000, Terrence Brannon wrote: >> eth2 IEEE 802.11-DS ESSID:"not_sure_what_to_set" Nickname:"HERMES >> I" >> Mode:Managed Frequency:2.457 GHz Access Point: >> 44:44:44:44:44:44 >> Bit Rate:2 Mb/s Tx-Power=15 dBm Sensitivity:1/3 >> Retry limit:4 RTS thr:off Fragment thr:off >> Encryption key:off >> Power Management:off >> Link Quality=0/92 Signal level=134/153 Noise level=134/153 >> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 >> Tx excessive retries:0 Invalid misc:0 Missed beacon:0 > > It looks like you don't have your wireless card setup to use encryption. > You will need to have the encryption turned on for your wireless card > and make sure that it has the correct key to use with your hub. > > -- > o) Derek Wueppelmann (o > (D . [EMAIL PROTECTED] D). > ((` http://monkey.homeip.net/ ( ) ` > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]