On Mon, 29 Aug 2005, Dirk wrote: > /dev/dvd: > IO_support = 0 (default 16-bit) > unmaskirq = 0 (off) > using_dma = 0 (off) ^^^^^^^^^^^^^^^^^^^^^^^^^
hdparm -u 1 -d 1 /dev/dvd If it complains, configure your next kernel to allow DMA for ATAPI devices, and try again... > I thought that (since 2.6.8) it is a common problem that ppl can't burn > stuff with cdrecord anymore... Make DAMN sure you have removed that scsi emulation crap (ide-cd must be the driver of your cd/dvdrom) and use the ATAPI interface directly (i.e you use ATA:x,y,z as the cdrecord device specifier). After you got DMA enabled using a properly configured kernel, that is. > I was told to try/use dvdrecord instead of cdrecord... That won't change anything. -- "One disk to rule them all, One disk to find them. One disk to bring them all and in the darkness grind them. In the Land of Redmond where the shadows lie." -- The Silicon Valley Tarot Henrique Holschuh -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]