Le Dimanche 15 Janvier 2006 02:43, Sridhar M.A. a écrit : > On Sat, Jan 14, 2006 at 10:53:13PM +0100, sebastien marbrier wrote: > > I tried to put the nvidia module into /etc/modules but nothing > > changed, I also tried to install it through the module-update method > > as it is described on andesi.org but it has worked either, so I think > > I have to blame XFree for this, unless I have a mistake. > > I have these lines in my /etc/modules : > > ide-cd > psmouse > nvidia > > The dmesg contains the following lines relating to nvidia: > > nvidia: module license 'NVIDIA' taints kernel. > ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 > ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKE] -> GSI 11 (level, low) > -> IRQ 11 NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-8178 > Wed Dec 14 16:22:51 PST 2005 > > What does your dmesg say about the same? Do you get any error there? > Please check it. > > > So maybe I should try with xorg. How did you get it ? Did you get it > > from backports.org ? > > Yes. Xorg is from backports. For that matter, I had no problem > with xfree either. > > Regards,
Yes, I have the same things. My /etc/modules contains ide-cd ide-disk ide-generic psmouse sd_mod ####MODIFS MANUELLES####### capability commoncap nvidia ########################## My dmesg echoes nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-8178 Wed Dec 14 16:22:51 PST 2005 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-8178 Wed Dec 14 16:22:51 PST 2005 agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode The only errors I get is the following message after X crashes juster after the nvidia logo: *** If unresolved symbols were reported above, they might not *** be the reason for the server aborting. Fatal server error: Caught signal 11. Server aborting Far above I have these warnings but I don't think they cause X to crash: (II) Reloading /usr/X11R6/lib/modules/libddc.a (WW) NVIDIA(0): The user specified HorizSync "28.000-49.000" has been adjusted (WW) NVIDIA(0): to "30.000-49.000" (the intersection with EDID-specified (WW) NVIDIA(0): HorizSync "30.000-61.000") (WW) NVIDIA(0): The user specified VertRefresh "43.000-72.000" has been (WW) NVIDIA(0): adjusted to "56.000-72.000" (the intersection with (WW) NVIDIA(0): EDID-specified VertRefresh "56.000-75.000" (II) NVIDIA(0): IBM ThinkVision 150: Using hsync range of 30.00-49.00 kHz (II) NVIDIA(0): IBM ThinkVision 150: Using vrefresh range of 56.00-72.00 Hz My nvidia module is located at /lib/modules/2.6.14-camel/kernel/drivers/video/ and I have a nvidia_agp at /lib/modules/2.6.14-camel/kernel/drivers/char/agp/ I know that the nvidia module loads perfectly as long as I don't use the glx module in /etc/X11/XF86Config-4. That's the reason why I think it could be XFree or my mesa libs but how can get a clue about this issue ? Sebastien Marbrier