On Mon, 2006-02-13 at 13:43, [EMAIL PROTECTED] wrote:
I cannot get my linux box to act as a router, I'm hoping someone can help.
My setup is sarge on a machine with 2 NICs, 192.168.1.2 and 192.168.2.1.
I attach 192.168.1.2 to another machine with 2 NICs [192.168.1.1 and
192.168.0.6]. This is a Win2K machine, and it routes connections from the
linux box to other machines on the 192.168.0.0/24 network.
I now want to attach another machine [192.168.2.2] to 192.168.2.1. This
machine [192.168.2.2] can ping either NIC in the linux box, but it cannot
contact machines beyond it.
Your network looks like this:
.------. .-----------. .-----------.
| A | | B | | C |
| .2.2 +---+ .2.1 .1.2 +---+ .1.1 .0.6 +--- .0.*
`------' `-----------' `-----------'
When you attempt to send a packet from .2.2 to .1.1, how does system A
know where to send it?
Assuming such a packet reaches .1.1, how does system C know where to
send the reply?
You may need some routes. Perhaps these will allow A and C to talk.
On A# route add default gw 192.168.2.1
On C# route add -net 192.168.2.0/24 gw 192.168.1.2
You have four or more hosts on three or more network segments. I'd
strongly recommend an introductory networking course or book. With
a firm understanding of the principles there's no limit to what you
can achieve.
--Mike Bird
Thanks Mike. I have routes set up as you describe, and when I look at the
routing cache on the debian box [...1.2 and ...2.1] using route -Cn, packets
from 192.168.1.1 trying to get to 192.168.2.2, and vice versa, appear in the
list. This is from using ping from ..2.2 to ..1.1 and the other way round.
That means they are arriving in the debian machine, but it seems not to be
doing much with them. The flag shown is "i", but man route doesn't explain
the meaning of that.
Regards
- Joe
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
