I'm now running a 2.6.8 kernel and my sound card, which worked find with 2.4.*, no longer works. (The XFCE4 volume control won't adjust above 0, and when I run XMMS it runs through the sound files at very high speed and produces no sound.)
`lscpi` describes the card thus: 0000:00:0c.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02) Subsystem: Ensoniq Creative Sound Blaster AudioPCI128 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (3000ns min, 32000ns max) Interrupt: pin A routed to IRQ 209 Region 0: I/O ports at d000 [size=64] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- The devices appear normal (I think): /dev/dmmidi /dev/dsp /dev/midi and /dev/mixer are symlinks to /dev/sound/dmmidi /dev/sound/dsp /dev/sound/midi and /dev/sound/mixer, which exist: $ ls -l /dev/sound/ total 0 crw-rw---- 1 root audio 14, 9 1970-01-01 01:00 dmmidi crw-rw---- 1 root audio 14, 3 1970-01-01 01:00 dsp crw-rw---- 1 root audio 14, 2 1970-01-01 01:00 midi crw-rw---- 1 root audio 14, 0 1970-01-01 01:00 mixer lsmod includes the following: ac97_codec 18700 1 es1371 audio 48064 0 es1371 36864 0 snd 57380 7 snd_ens1371,snd_ac97_codec,snd_usb_audio,snd_rawmidi,snd_seq_device,snd_pcm,snd_timer snd_ac97_codec 69508 1 snd_ens1371 snd_ens1371 25252 0 snd_page_alloc 11720 1 snd_pcm snd_pcm 97480 2 snd_ens1371,snd_usb_audio snd_rawmidi 25316 2 snd_ens1371,snd_usb_audio snd_seq_device 8264 1 snd_rawmidi snd_timer 25668 1 snd_pcm snd_usb_audio 72544 0 soundcore 10336 3 es1371,snd,audio usbcore 118308 10 usbhid,ehci_hcd,uhci_hcd,snd_usb_audio,audio,pwc,ohci_hcd,usb_storage I would appreciate any suggestions on how to fix this. Thanks, Adam -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]