Knoppix 4.0 Live DVD works fine and automatically detects and configures
the built-in ethernet port which I can use to connect to the router and
the internet without a problem.
/------------------------------
/uname -a/
Linux Knoppix 2.6.12 #2 SMP Tue Aug 9 23:20:52 CEST 2005 i686 GNU/Linux
------------------------------
//etc/resolve.conf/
search lan
nameserver 10.0.0.138
------------------------------
//etc/network/interfaces/
# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
# The loopback interface
# automatically added when upgrading
auto lo
iface lo inet loopback
------------------------------
/ping -c 3 10.0.0.138/
PING 10.0.0.138 (10.0.0.138): 56 data bytes
64 bytes from 10.0.0.138: icmp_seq=0 ttl=64 time=0.4 ms
64 bytes from 10.0.0.138: icmp_seq=1 ttl=64 time=0.4 ms
64 bytes from 10.0.0.138: icmp_seq=2 ttl=64 time=0.4 ms
--- 10.0.0.138 ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max = 0.4/0.4/0.4 ms
------------------------------
/ifconfig/
eth0 Link encap:Ethernet HWaddr 00:00:E2:4E:AC:F1
inet addr:10.0.0.4 Bcast:10.0.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:11 errors:0 dropped:0 overruns:0 frame:0
TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1549 (1.5 KiB) TX bytes:1772 (1.7 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:14 errors:0 dropped:0 overruns:0 frame:0
TX packets:14 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:700 (700.0 b) TX bytes:700 (700.0 b)
------------------------------
/lspci/
0000:00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and
Memory Controller Hub (rev 02)
0000:00:02.0 VGA compatible controller: Intel Corp. 82815 CGC [Chipset
Graphics Controller] (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 02)
0000:00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 02)
0000:00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 02)
0000:00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 02)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97
Audio (rev 02)
0000:01:00.0 Multimedia audio controller: Avance Logic Inc. ALS4000
Audio Chipset
0000:01:01.0 VGA compatible controller: nVidia Corporation NV5M64 [RIVA
TNT2 Model 64/Model 64 Pro] (rev 15)
0000:01:08.0 Ethernet controller: Intel Corp. 82801BA/BAM/CA/CAM
Ethernet Controller (rev 01)
------------------------------
/lsmod | grep e100/
e100 37248 0
mii 8320 1 e100
------------------------------
/dmesg | grep eth/
e100: eth0: e100_probe: addr 0x80120000, irq 10, MAC addr 00:00:E2:4E:AC:F1
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
------------------------------
/dmesg | grep e100/
e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
e100: eth0: e100_probe: addr 0x80120000, irq 10, MAC addr 00:00:E2:4E:AC:F1
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
------------------------------
//etc/network/options/
ip_forward=no
spoofprotect=yes
syncookies=no
------------------------------
/route/
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.0.0.0 * 255.255.255.0 U 0 0 0 eth0
default SpeedTouch.lan 0.0.0.0 UG 0 0 0 eth0
------------------------------
/dmesg |grep IRQ/
PCI: Discovered primary peer bus 02 [IRQ]
PCI: Using IRQ router PIIX/ICH [8086/2440] at 0000:00:1f.0
PCI: Found IRQ 3 for device 0000:00:1f.2
PCI: Found IRQ 10 for device 0000:00:1f.4
Serial: 8250/16550 driver $Revision: 1.90 $ 14 ports, IRQ sharing disabled
PCI: Found IRQ 10 for device 0000:01:08.0
PCI: Found IRQ 11 for device 0000:01:00.0
PCI: Sharing IRQ 11 with 0000:00:02.0
PCI: Found IRQ 9 for device 0000:00:1f.5
PCI: Sharing IRQ 9 with 0000:00:1f.3
PCI: Sharing IRQ 9 with 0000:01:01.0
i810: Intel ICH2 found at IO 0x8800 and 0x8400, MEM 0x0000 and 0x0000,
IRQ 9
PCI: Found IRQ 11 for device 0000:00:02.0
PCI: Sharing IRQ 11 with 0000:01:00.0
------------------------------
--
http://www.mishkah.org
Linux version 2.6.12 ([EMAIL PROTECTED]) (gcc-Version 3.3.6 (Debian 1:3.3.6-7))
#2 SMP Tue Aug 9 23:20:52 CEST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fed0000 (usable)
BIOS-e820: 000000000fed0000 - 000000000fee0000 (reserved)
BIOS-e820: 000000000fee0000 - 000000000fee8000 (ACPI data)
BIOS-e820: 000000000fee8000 - 000000000ff00000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
254MB LOWMEM available.
On node 0 totalpages: 65232
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 61136 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 ACER ) @ 0x000fe030
ACPI: RSDT (v001 ACER S58M 0x00000001 ACER 0x00000000) @ 0x0fee0000
ACPI: FADT (v001 ACER S58M 0x00000001 ACER 0x00000000) @ 0x0fee0028
ACPI: DSDT (v001 Acer S58M 0x00001000 MSFT 0x0100000a) @ 0x00000000
ACPI: BIOS age (2001) fails cutoff (2002), acpi=force is required to enable ACPI
ACPI: Disabling ACPI support
Allocating PCI resources starting at 0ff00000 (gap: 0ff00000:f0080000)
Built 1 zonelists
Kernel command line: ### isk_size=100000 init=/etc/init lang=us apm=power-off
vga=791 initrd=minirt.gz nomce quiet BOOT_IMAGE=knoppix BOOT_IMAGE=linux
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (012ff000)
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 903.955 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 252632k/260928k available (1882k kernel code, 7616k reserved, 999k
data, 296k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1699.84 BogoMIPS (lpj=849920)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000
00000000 00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000
00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000
00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
CPU0: Intel Pentium III (Coppermine) stepping 06
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
CPU0 attaching sched-domain:
domain 0: span 00000001
groups: 00000001
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 858k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xf0220, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f6880
PnPBIOS: PnP BIOS version 1.0, entry 0xf8310:0x0, dseg 0xf0000
PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver
SCSI subsystem initialized
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:01.0
PCI: Transparent bridge - 0000:00:1e.0
PCI: Discovered primary peer bus 02 [IRQ]
PCI: Using IRQ router PIIX/ICH [8086/2440] at 0000:00:1f.0
pnp: 00:08: ioport range 0x400-0x47f has been reserved
pnp: 00:08: ioport range 0x480-0x4bf has been reserved
pnp: 00:08: ioport range 0xe00-0xe7f has been reserved
audit: initializing netlink socket (disabled)
audit(1139334459.523:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
vesafb: framebuffer at 0x84000000, mapped to 0xd0880000, using 3072k, total
4096k
vesafb: mode is 1024x768x16, linelength=2048, pages=0
vesafb: protected mode interface info at c000:02e5
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 0000:00:1f.1
ICH2: chipset revision 2
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x8c00-0x8c07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0x8c08-0x8c0f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: ST320413A, ATA DISK drive
hdb: LG DVD-ROM DRD-8160B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: CD-ROM 52X/AKH, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: Host Protected Area detected.
current capacity is 39102336 sectors (20020 MB)
native capacity is 39102337 sectors (20020 MB)
hda: Host Protected Area disabled.
hda: 39102337 sectors (20020 MB) w/512KiB Cache, CHS=38792/16/63
hda: cache flushes not supported
hda: hda1 hda2 hda3
hdb: ATAPI 48X DVD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.20
hdc: ATAPI 52X CD-ROM drive, 192kB Cache
libata version 1.11 loaded.
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 7
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 16Kbytes
TCP established hash table entries: 8192 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 4, 98304 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
NET: Registered protocol family 1
NET: Registered protocol family 15
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
input: AT Translated Set 2 keyboard on isa0060/serio0
seagate: ST0x/TMC-8xx not detected.
Failed initialization of WD-7000 SCSI card!
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
PCI: Found IRQ 3 for device 0000:00:1f.2
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: Intel Corporation 82801BA/BAM USB (Hub #1)
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1f.2: irq 3, io base 0x00008880
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Found IRQ 10 for device 0000:00:1f.4
PCI: Setting latency timer of device 0000:00:1f.4 to 64
uhci_hcd 0000:00:1f.4: Intel Corporation 82801BA/BAM USB (Hub #2)
uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1f.4: irq 10, io base 0x000088c0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
Initializing USB Mass Storage driver...
usb 1-1: new low speed USB device using uhci_hcd and address 2
usb 1-2: new low speed USB device using uhci_hcd and address 3
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
ieee1394: Initialized config rom entry `ip1394'
sbp2: $Rev: 1219 $ Ben Collins <[EMAIL PROTECTED]>
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1)
Unable to identify CD-ROM format.
VFS: Can't find an ext2 filesystem on dev hda.
FAT: bogus number of FAT structure
VFS: Can't find a valid FAT filesystem on dev hda.
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
cloop: Initializing cloop v2.02
cloop: loaded (max 8 devices)
cloop: /cdrom/KNOPPIX/KNOPPIX: 82157 blocks, 65536 bytes/block, largest block
is 65562 bytes.
ISO 9660 Extensions: RRIP_1991A
cloop: losetup_file: 28811 blocks, 65536 bytes/block, largest block is 65562
bytes.
ISO 9660 Extensions: RRIP_1991A
Registering unionfs 20050811-1552
Freeing unused kernel memory: 296k freed
Real Time Clock Driver v1.12
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
usbcore: registered new driver hiddev
input: USB HID v1.00 Mouse [Logitech] on usb-0000:00:1f.2-1
input: USB HID v1.10 Keyboard [NOVATEK USB Multimedia Keyboard] on
usb-0000:00:1f.2-2
input: USB HID v1.10 Device [NOVATEK USB Multimedia Keyboard] on
usb-0000:00:1f.2-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
ts: Compaq touchscreen protocol output
Serial: 8250/16550 driver $Revision: 1.90 $ 14 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
hw_random: RNG not detected
e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
PCI: Found IRQ 10 for device 0000:01:08.0
e100: eth0: e100_probe: addr 0x80120000, irq 10, MAC addr 00:00:E2:4E:AC:F1
PCI: Found IRQ 11 for device 0000:01:00.0
PCI: Sharing IRQ 11 with 0000:00:02.0
Intel 810 + AC97 Audio, version 1.01, 22:38:37 Aug 9 2005
PCI: Found IRQ 9 for device 0000:00:1f.5
PCI: Sharing IRQ 9 with 0000:00:1f.3
PCI: Sharing IRQ 9 with 0000:01:01.0
PCI: Setting latency timer of device 0000:00:1f.5 to 64
i810: Intel ICH2 found at IO 0x8800 and 0x8400, MEM 0x0000 and 0x0000, IRQ 9
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
ac97_codec: AC97 Audio codec, id: ADS72 (Analog Devices AD1881A)
i810_audio: AC'97 codec 0 Unable to map surround DAC's (or DAC's not present),
total channels = 2
i810_audio: setting clocking to 48813
NTFS driver 2.1.22 [Flags: R/W MODULE].
NTFS volume version 3.1.
Adding 538168k swap on /dev/hda2. Priority:-1 extents:1
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ReiserFS: hda3: using ordered data mode
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: Using r5 hash to sort names
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
NET: Registered protocol family 17
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel i815 Chipset.
agpgart: detected 4MB dedicated video ram.
agpgart: AGP aperture is 64M @ 0x88000000
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[drm] Initialized drm 1.0.0 20040925
PCI: Enabling device 0000:00:02.0 (0004 -> 0006)
PCI: Found IRQ 11 for device 0000:00:02.0
PCI: Sharing IRQ 11 with 0000:01:00.0
[drm] Initialized i810 1.4.0 20030605 on minor 0: Intel Corporation 82815 CGC
[Chipset Graphics Controller]
usb 2-1: new full speed USB device using uhci_hcd and address 2
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 1 port detected
usb 2-1.1: new full speed USB device using uhci_hcd and address 3
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
Vendor: LG Model: X-TICK 2.0 Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 507904 512-byte hdwr sectors (260 MB)
sda: Write Protect is off
sda: Mode Sense: 00 26 00 00
sda: assuming drive cache: write through
SCSI device sda: 507904 512-byte hdwr sectors (260 MB)
sda: Write Protect is off
sda: Mode Sense: 00 26 00 00
sda: assuming drive cache: write through
sda: sda1
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
usb-storage: device scan complete
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ReiserFS: hda3: using ordered data mode
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: Using r5 hash to sort names
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0381d00(lo)
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
