Em Qua, 2006-03-01 às 05:50 -0500, Kevin Dean escreveu: > Greetings, > > This is my first post the mailing lists, so please forgive me if I > err. > > I am setting up a new system, and running into several issues on > various distros, all Debian based. This is the DEBIAN mailing list, so > I will limit my discussion specifically to Debian "sarge", from the > current net install image. > > The setup goes smoothly, and I can boot into my minimal Debian system. > I can apt-get to my heart's content, browse with some of the text > browsers and do just about anything else. However, when this specific > system receive INCOMING traffic, it begins to drop it's connection. > Very specifically, this system will be used to host websites and after > successfully installing either Ravencore ( www.ravencore.com) or VHCS, > and administering them via the web interface from a different computer > on my network, I get these errors. > > I posted this question in #Debian on freenode, and got some response, > however none of the responses solved the issue. > > While this machine sits at a root terminal, it prompts me with a quite > sizable blob of text, below: > > NETDEV WATCHDOG: eth0: transmit timed out > eth0: transmit timed out, tx_status 00 e000. > diagnostics net 0cd8 media 8880 dma 000000a0 fifo 0000 > Flags; bus-master 1, dirty 300(12) current 316(12) > transmit list 0f2b8a20 vs cf2b8980 > 0:@cf2b8200 length 80000042 status 00000042 > 1:@cf2b82a0 length 80000042 status 00000042 > 2:@cf2b8340 length 80000042 status 00000042 > 3:@cf2b83e0 length 80000042 status 00000042 > 4:@cf2b8480 length 80000042 status 00000042 > 5:@cf2b8520 length 80000042 status 00000042 > 6:@cf2b85c0 length 80000042 status 00000042 > [EMAIL PROTECTED] length 80000042 status 00000042 > 8:@cf2b8700 length 80000042 status 00000042 > 9:@cf2b87a0 length 80000042 status 00000042 > 10:@cf2b8840 length 80000042 status 00000042 > 11:@cf2b88e0 length 80000042 status 00000042 > 12:@cf2b8980 length 80000042 status 00000042 > 13:@cf2b8a20 length 80000042 status 00000042 > 14:@cf2b8ac0 length 80000042 status 00000042 > 15:@cf2b8b60 length 80000042 status 00000042 > eth0: command 0x3002 did not complete! Status 0xf000 > > dmesg also adds the following line to this output: >
> eth0: Resetting the Tx ring pointer > I had similar problems recently (same error messages) I resolved it by changing the NIC from a via-rhine to a 3Com Michel.