Paolo Pantaleo wrote:
Hi,
I have a Debian testing. I am experiencing sme problmes with ethernet
cards ip configurations. My /etc/network/interfaces file is:
### etherconf DEBCONF AREA. DO NOT EDIT THIS AREA OR INSERT TEXT BEFORE IT.
auto lo
iface lo inet loopback
### END OF DEBCONF AREA. PLACE YOUR EDITS BELOW; THEY WILL BE PRESERVED.
iface eth1 inet static
address 172.18.255.77
netmask 255.255.255.0
iface eth0 inet static
address 172.18.3.51
netmask 255.255.255.0
gateway 172.18.3.254
auto eth0
auto eth1
but if I run ip addr I get:
1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:0c:6e:91:c4:11 brd ff:ff:ff:ff:ff:ff
inet 169.254.125.207/16 scope link eth0
inet 172.18.3.51/24 brd 172.18.3.255 scope global eth0
inet6 fe80::20c:6eff:fe91:c411/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:0e:e8:8a:20:cd brd ff:ff:ff:ff:ff:ff
inet 169.254.130.156/16 scope link eth1
inet 172.18.255.77/24 brd 172.18.255.255 scope global eth1
inet6 fe80::20e:e8ff:fe8a:20cd/64 scope link
valid_lft forever preferred_lft forever
4: sit0: <NOARP> mtu 1480 qdisc noop
link/sit 0.0.0.0 brd 0.0.0.0
and ip route:
172.18.3.0/24 dev eth0 proto kernel scope link src 172.18.3.51
172.18.255.0/24 dev eth1 proto kernel scope link src 172.18.255.77
169.254.0.0/16 dev eth0 proto kernel scope link src 169.254.125.207
169.254.0.0/16 dev eth1 proto kernel scope link src 169.254.130.156
default via 172.18.3.254 dev eth0
So where the 169.* addresses can come from?
did you install avahi ?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]