I don't believe the kernel PnP is configuring the card properly. How do I pass arguments to the kernel PnP?
Running unstable, gcc 2.95 for kernel and module compiles Alsa and this card worked find in the 9.0-9.2 alsa versions using the defaults Somewhere in 9.3 and now in 9.4 the modules fail PnP is off in the BIOS PnP and IsaPNP compiled as modules SoundCard support compiled as module Debugging in Alsa turned on isapnp: Scanning for PnP cards... isapnp: SB audio device quirk - increasing port range isapnp: AWE32 quirk - adding two ports isapnp: Card 'Creative SB AWE64 PnP' isapnp: 1 Plug & Play card detected total ALSA ../../alsa-kernel/isa/sb/sb16.c:313: pnp SB16: port=0x220, mpu port=0x330, fm port=0x388 ALSA ../../alsa-kernel/isa/sb/sb16.c:315: pnp SB16: dma1=1, dma2=5, irq=5 ALSA ../../alsa-kernel/isa/sb/sb16.c:336: pnp SB16: wavetable port=0x620 ALSA ../../alsa-kernel/isa/sb/sb_common.c:133: SB [0x220]: DSP chip found, version = 4.16 ALSA ../../alsa-kernel/isa/sb/sb16.c:505: sbawe: fatal error - EMU-8000 synthesizer not detected at 0x620 ALSA ../../alsa-kernel/isa/sb/sb16.c:638: Sound Blaster 16 soundcard not found or device busy ALSA ../../alsa-kernel/isa/sb/sb16.c:640: In case, if you have non-AWE card, try snd-sb16 module /lib/modules/2.4.20/alsa/snd-sbawe.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg /lib/modules/2.4.20/alsa/snd-sbawe.o: insmod /lib/modules/2.4.20/alsa/snd-sbawe.o failed /lib/modules/2.4.20/alsa/snd-sbawe.o: insmod snd-sbawe failed -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]