Hello, >Can you provide more information on your hardware? Output from a plain: > >lspci > >would be a start, as would the dmesg output.
Okay, attaching those two. >On my 1998 era PII machine with BIOStar M6TLC motherboard (Intel 440LX >chipset), dmesg reports "ACPI disabled in BIOS". I also purged acpid, >but have installed apmd. Running Sid here. I just installed apmd, will see if that helps. >I am using a PCI USB 2.0 card and a PCI Ethernet card with PCI mouse >plugged in. The BIOS supports a USB keyboard, but I have not tried >using a USB keyboard. > >Arthur. No USB keyboards here, just a USB printer, but leaving that out doesn't seem to help. Thanks, -Adam -- GPG fingerprint: D54D 1AEE B11C CE9B A02B C5DD 526F 01E8 564E E4B6 Welcome to the best software in the world today cafe! http://www.take6.com/albums/greatesthits.html
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03) 00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) 00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02) 00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) 00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01) 00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02) 00:09.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 05) 00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 01:00.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 3 (rev 01)
Linux version 2.6.18-1-686 (Debian 2.6.18-1) ([EMAIL PROTECTED]) (gcc version 4.1.2 20060901 (prerelease) (Debian 4.1.1-13)) #1 SMP Sun Sep 24 13:48:23 UTC 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f5ae0 On node 0 totalpages: 262128 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 32752 pages, LIFO batch:7 DMI 2.1 present. Intel MultiProcessor Specification v1.1 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 Processor #0 6:7 APIC version 17 Processor #1 6:7 APIC version 17 I/O APIC #2 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 2 Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) Detected 448.820 MHz processor. Built 1 zonelists. Total pages: 262128 Kernel command line: auto BOOT_IMAGE=2.6.18-1-686 ro root=301 acpi=off pci=norouteirq PCI: Unknown option `norouteirq' mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1031896k/1048512k available (1534k kernel code, 16048k reserved, 575k data, 196k init, 131008k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 898.56 BogoMIPS (lpj=1797136) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K CPU serial number disabled. CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code CPU0: Intel Pentium III (Katmai) stepping 02 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 897.70 BogoMIPS (lpj=1795411) CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K CPU serial number disabled. CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Pentium III (Katmai) stepping 02 Total of 2 processors activated (1796.27 BogoMIPS). ExtINT not setup in hardware but reported by MP table ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs migration_cost=2602 checking if image is initramfs... it is Freeing initrd memory: 4363k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfb1f0, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00fbe00 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbe28, dseg 0xf0000 PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) * Found PM-Timer Bug on the chipset. Due to workarounds for a bug, * this clock source is slow. Consider trying other clock sources PCI quirk: region 4000-403f claimed by PIIX4 ACPI PCI quirk: region 5000-500f claimed by PIIX4 SMB PCI: Firmware left 0000:00:09.0 e100 interrupts enabled, disabling Boot video device is 0000:01:00.0 PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0 PCI->APIC IRQ transform: 0000:00:07.2[D] -> IRQ 185 PCI->APIC IRQ transform: 0000:00:09.0[A] -> IRQ 177 PCI->APIC IRQ transform: 0000:00:0b.0[A] -> IRQ 185 PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 169 pnp: 00:0a: ioport range 0x208-0x20f has been reserved PCI: Bridge: 0000:00:01.0 IO window: d000-dfff MEM window: e4000000-e7ffffff PREFETCH window: e8000000-e9ffffff NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) audit(1160581661.096:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Limiting direct PCI/PCI transfers. isapnp: Scanning for PnP cards... pnp: SB audio device quirk - increasing port range pnp: AWE32 quirk - adding two ports isapnp: Card 'Creative AWE64 PnP' isapnp: 1 Plug & Play card detected total Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0e: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 Starting balanced_irq Using IPI No-Shortcut mode Time: tsc clocksource has been installed. Freeing unused kernel memory: 196k freed input: AT Translated Set 2 keyboard as /class/input/input0 usbcore: registered new driver usbfs usbcore: registered new driver hub Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 0000:00:07.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) USB Universal Host Controller Interface driver v3.0 hda: WDC AC310200R, ATA DISK drive hdb: WDC WD102AA, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: Pioneer DVD-ROM ATAPIModel DVD-106S 012, ATAPI CD/DVD-ROM drive hdd: CR-4802TE, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 e100: eth0: e100_probe: addr 0xeb100000, irq 177, MAC addr 00:04:AC:A6:0B:DD 8139cp 0000:00:0b.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip 8139cp 0000:00:0b.0: Try the "8139too" driver instead. uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:07.2: irq 185, io base 0x0000e000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected 8139too Fast Ethernet driver 0.9.27 hda: max request size: 128KiB hda: 20044080 sectors (10262 MB) w/512KiB Cache, CHS=19885/16/63, UDMA(33) hda: cache flushes not supported hda: hda1 hda2 hda3 hda4 hdb: max request size: 128KiB hdb: 20044080 sectors (10262 MB) w/2048KiB Cache, CHS=19885/16/63, UDMA(33) hdb: cache flushes not supported hdb: hdb1 hdc: ATAPI 40X DVD-ROM drive, 256kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 8X CD-ROM CD-R/RW drive, 2048kB Cache, DMA eth1: RealTek RTL8139 at 0xe800, 00:40:f4:15:2d:e5, IRQ 185 eth1: Identified 8139 chip type 'RTL-8139C' usb 1-2: new full speed USB device using uhci_hcd and address 2 usb 1-2: configuration #1 chosen from 1 choice EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: hda1: orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 27174 ext3_orphan_cleanup: deleting unreferenced inode 27173 ext3_orphan_cleanup: deleting unreferenced inode 27172 ext3_orphan_cleanup: deleting unreferenced inode 27171 EXT3-fs: hda1: 4 orphan inodes deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005 usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 440BX Chipset. agpgart: AGP aperture is 64M @ 0xe0000000 Real Time Clock Driver v1.12ac input: PC Speaker as /class/input/input1 pnp: Device 01:01.01 activated. gameport: NS558 PnP Gameport is pnp01:01.01/gameport0, io 0x200, speed 710kHz piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Adding 996020k swap on /dev/hda2. Priority:-1 extents:1 across:996020k EXT3 FS on hda1, internal journal device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: [EMAIL PROTECTED] kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda4, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on hdb1, internal journal ext3_orphan_cleanup: deleting unreferenced inode 1205434 EXT3-fs: hdb1: 1 orphan inode deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex lp0: using parport0 (interrupt-driven). ppdev: user-space parallel port driver eth1: link down NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth1: link is not ready IPv6 over IPv4 tunneling driver Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period eth0: no IPv6 routers present