Commend in /etc/X11/xorg.conf the following line out:
Load "dri"
As the output shows an error concerning dri.
If it still doesn't work, look at the lines with (EE) in front, look if
you can find something matching in /etc/X11/xorg.conf and comment it
out. That should do it.
Good luck!
Wayne Topa wrote:
> Hi all. Has anyone else upgraded Etch in the last few days and had a
> problem with X?
>
> Took me a few days but finally got the 100+Meg update completed and
> now find I don't have a working X anymore. Actually it 'might' be
> working but I can't see it working because the screen is black but
> the log shows..
>
> ________________________________
> X Window System Version 7.1.1
> Release Date: 12 May 2006
> X Protocol Version 11, Revision 0, Release 7.1.1
> Build Operating System: UNKNOWN
> Current Operating System: Linux buddy 2.6.15y #7 Wed Sep 27 20:08:11 EDT 2006
> i686
> Build Date: 07 July 2006
> Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> Module Loader present
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.1.log", Time: Fri Nov 10 15:48:09 2006
> (==) Using config file: "/etc/X11/xorg.conf"
> (EE) AIGLX: Screen 0 is not DRI capable
> xkb_keycodes { include "xfree86+aliases(qwerty)" };
> xkb_types { include "complete" };
> xkb_compatibility { include "complete" };
> xkb_symbols { include "pc(pc105)+us" };
> xkb_geometry { include "pc(pc104)" };
> kbuildsycoca running...
> ___________________________
>
>
> I 'wgot' the link mentioned in a d-u post about AIGLX
> <http://gentoo-wiki.com/HOWTO_AIGLX> but my video card, a
> Tseng Labs Inc ET6000, isn't listed as supported. I tried commenting
> out the 'Load "dri"' but get the same error. I hope that this is just
> a small bug rather then Etch moving up and away form older video
> cards.
>
> I did not find any mention of my problem on <http://wiki.x.org>.
>
> Wayne
>
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
