Erico Schuch escreveu:
Same as I have.
Correction.... HAD ;)
I found that the 2.6 pre-compiled debian kernel is using ext3, reiser
and others fs as modules. I did :
# apt-get install kernel-image.2.6XXX
# apt-get install kernel-source.2.6XXX
# apt-get install kernel-tree.2.6XXX
The last "apt-get" I think its no necessary.
note the XXX ! please change to your kernel variant. My is 686!
Then :
cd /usr/src
# tar xjf kernel-source-2.6XXX
# cp /boot/config-2.6* kernel-source-2.6XXX/.config
# cd kernel-source-2.6XXX
# make menuconfig
Configured to use ext3, xfs and reiserfs not as modules. Save and quit
the menu.
# make-kpkg --initrd --us --uc kernel_image
# dpkg -i kernel-image-2.6_10.00.Custom_iXXX.deb
after all, I remove the lilo.conf and generate another as I don´t
realy care about lilo
# rm /etc/lilo.conf
# liloconfig
# reboot
Good luck
Erico Schuch
Morgan Walker escreveu:
Hey guys,
After updating to 2.6.16-2-amd64-k8-smp on my Sun X4100 I rebooted
and got the following error:
VFS: Cannot open root device md0 or unknown-block(0,0)
Please append a correct "root=" boot option
Kernel Panic -- not syncing: VFS: Unable to mount root fs on
unknown-block(0,0)
And this is where it will stop during the boot process. I am running
a RAID1 on this machine. When the screen comes up to choose which
kernel I want to boot, I press "e" to edit the grub/menu.list, but
all looks well. Here is what I have:
root (hd0,0)
kernel /boot/vmlinuz-2.6.16-2-amd64-k8-smp root=/dev/md0 ro
initrd /boot/initrd.img-2.6.16-2-amd64-k8-smp
savedefault
I'm stumped, what options do I have?
Thanks in advance,
Morgan
**Morgan Walker******
**Systems Administrator/Engineer**
**M·CAM, Inc.**
**210 Ridge-McIntire Rd.****, Suite 300******
**Charlottesville****, VA 22903******
**434-979-7240 x311**
http://www.m-cam.com
=========================================================
This message, including any attachments, is intended solely for the use
of the named recipient(s) and may contain confidential and/or
privileged information. Any unauthorized review, use, disclosure or
distribution of this communication(s) is expressly prohibited.
If you are not the intended recipient, please contact the sender by
reply e-mail and destroy any and all copies of the original message.
Thank you.
=========================================================
