From: Hugo Vanwoerkom <[EMAIL PROTECTED]>
To: debian-user@lists.debian.org
Subject: Re: Etch froze me out....
Date: Sun, 17 Dec 2006 15:15:53 -0600
Michael Fothergill wrote:
Dear Debian folks,
I was running jigdo downloading a DVD image and I had a few other packages
and windows open. I left my machine running (Etch RC1) and the screen
eventually went dark.
I waggled the mouse and tapped the keyboard several times but nothing
happened.
The machine was busy. I think it was still running jigdo.
More keyboard tapping and mouse waggling made no difference.
So I rebooted.
The system seems OK again.
Is this serious?
Logs?
Here is the messages log file:
My date is wrong for some reason.
Dec 18 03:55:01 spc1-burn4-0-0-cust262 kernel: [drm] Initialized drm 1.0.1
20051102
Dec 18 03:55:01 spc1-burn4-0-0-cust262 kernel: [drm] Initialized sis 1.1.0
20030826 on minor 0
Dec 18 03:55:01 spc1-burn4-0-0-cust262 kernel: agpgart: Found an AGP 2.0
compliant device at 0000:00:00.0.
Dec 18 03:55:01 spc1-burn4-0-0-cust262 kernel: agpgart: Putting AGP V2
device at 0000:00:00.0 into 2x mode
Dec 18 03:55:01 spc1-burn4-0-0-cust262 kernel: agpgart: Putting AGP V2
device at 0000:01:00.0 into 2x mode
Dec 18 03:55:16 spc1-burn4-0-0-cust262 gconfd (mikef-2815): starting
(version 2.16.0), pid 2815 user 'mikef'
Dec 18 03:55:16 spc1-burn4-0-0-cust262 gconfd (mikef-2815): Resolved address
"xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration
source at position 0
Dec 18 03:55:16 spc1-burn4-0-0-cust262 gconfd (mikef-2815): Resolved address
"xml:readwrite:/home/mikef/.gconf" to a writable configuration source at
position 1
Dec 18 03:55:16 spc1-burn4-0-0-cust262 gconfd (mikef-2815): Resolved address
"xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration
source at position 2
Dec 18 03:55:16 spc1-burn4-0-0-cust262 gconfd (mikef-2815): Resolved address
"xml:readonly:/var/lib/gconf/debian.defaults" to a read-only configuration
source at position 3
Dec 18 03:55:16 spc1-burn4-0-0-cust262 gconfd (mikef-2815): Resolved address
"xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source
at position 4
Dec 18 03:55:22 spc1-burn4-0-0-cust262 gconfd (mikef-2815): Resolved address
"xml:readwrite:/home/mikef/.gconf" to a writable configuration source at
position 0
Dec 18 04:14:49 spc1-burn4-0-0-cust262 -- MARK --
Dec 18 04:34:49 spc1-burn4-0-0-cust262 -- MARK --
Dec 18 04:43:26 spc1-burn4-0-0-cust262 kernel: cdrom: This disc doesn't have
any tracks I recognize!
Dec 18 04:54:50 spc1-burn4-0-0-cust262 -- MARK --
Dec 18 05:14:50 spc1-burn4-0-0-cust262 -- MARK --
Dec 18 05:34:50 spc1-burn4-0-0-cust262 -- MARK --
Dec 18 05:54:51 spc1-burn4-0-0-cust262 -- MARK --
Dec 18 06:14:52 spc1-burn4-0-0-cust262 -- MARK --
Dec 18 06:34:53 spc1-burn4-0-0-cust262 -- MARK --
Dec 18 06:54:53 spc1-burn4-0-0-cust262 -- MARK --
Dec 18 07:14:54 spc1-burn4-0-0-cust262 -- MARK --
Dec 18 07:34:55 spc1-burn4-0-0-cust262 -- MARK --
Dec 18 07:54:55 spc1-burn4-0-0-cust262 -- MARK --
Dec 18 08:12:27 spc1-burn4-0-0-cust262 kernel: cdrom: This disc doesn't have
any tracks I recognize!
Dec 18 08:34:55 spc1-burn4-0-0-cust262 -- MARK --
Dec 18 08:54:56 spc1-burn4-0-0-cust262 -- MARK --
I think this is where I rebooted after being locked out:
Dec 18 09:08:46 spc1-burn4-0-0-cust262 syslogd 1.4.1#18: restart.
Dec 18 09:08:46 spc1-burn4-0-0-cust262 kernel: klogd 1.4.1#18, log source =
/proc/kmsg started.
Dec 18 09:08:46 spc1-burn4-0-0-cust262 kernel: eady [0x1][0x300]
Dec 18 09:08:46 spc1-burn4-0-0-cust262 kernel: AC'97 1 does not respond -
RESET
Dec 18 09:08:46 spc1-burn4-0-0-cust262 kernel: ACPI: PCI interrupt for
device 0000:00:01.6 disabled
Dec 18 09:08:46 spc1-burn4-0-0-cust262 kernel: Intel ICH Modem: probe of
0000:00:01.6 failed with error -5
Dec 18 09:08:46 spc1-burn4-0-0-cust262 kernel: ts: Compaq touchscreen
protocol output
Dec 18 09:08:46 spc1-burn4-0-0-cust262 kernel: Adding 706820k swap on
/dev/hda5. Priority:-1 extents:1 across:706820k
Dec 18 09:08:46 spc1-burn4-0-0-cust262 kernel: EXT3 FS on hda1, internal
journal
Dec 18 09:08:46 spc1-burn4-0-0-cust262 kernel: loop: loaded (max 8 devices)
Dec 18 09:08:46 spc1-burn4-0-0-cust262 kernel: device-mapper: ioctl:
4.7.0-ioctl (2006-06-24) initialised: [EMAIL PROTECTED]
Dec 18 09:08:47 spc1-burn4-0-0-cust262 kernel: ACPI: Power Button (FF)
[PWRF]
Dec 18 09:08:47 spc1-burn4-0-0-cust262 kernel: ACPI: Power Button (CM)
[PWBX]
Dec 18 09:08:47 spc1-burn4-0-0-cust262 kernel: ACPI: Sleep Button (CM)
[SLPB]
Dec 18 09:08:47 spc1-burn4-0-0-cust262 kernel: lp0: using parport0
(interrupt-driven).
Dec 18 09:08:47 spc1-burn4-0-0-cust262 kernel: ppdev: user-space parallel
port driver
Dec 18 09:08:52 spc1-burn4-0-0-cust262 dhcdbd: Started up.
Dec 18 09:08:53 spc1-burn4-0-0-cust262 kernel: eth1: Media Link Off
Dec 18 09:08:53 spc1-burn4-0-0-cust262 kernel: eth0: link up, 10Mbps,
half-duplex, lpa 0x0000
Dec 18 09:08:53 spc1-burn4-0-0-cust262 dhcdbd: message_handler: message
handler not found under /com/redhat/dhcp/eth0 for sub-path
eth0.dbus.get.reason
Dec 18 09:08:53 spc1-burn4-0-0-cust262 dhcdbd: message_handler: message
handler not found under /com/redhat/dhcp/eth0 for sub-path
eth0.dbus.get.reason
Dec 18 09:08:53 spc1-burn4-0-0-cust262 kernel: NET: Registered protocol
family 10
Dec 18 09:08:53 spc1-burn4-0-0-cust262 kernel: lo: Disabled Privacy
Extensions
Dec 18 09:08:53 spc1-burn4-0-0-cust262 kernel: ADDRCONF(NETDEV_UP): eth1:
link is not ready
Dec 18 09:08:53 spc1-burn4-0-0-cust262 kernel: IPv6 over IPv4 tunneling
driver
Dec 18 09:08:54 spc1-burn4-0-0-cust262 lpd[2508]: restarted
Dec 18 09:08:58 spc1-burn4-0-0-cust262 kernel: [drm] Initialized drm 1.0.1
20051102
Dec 18 09:08:58 spc1-burn4-0-0-cust262 kernel: [drm] Initialized sis 1.1.0
20030826 on minor 0
Dec 18 09:08:58 spc1-burn4-0-0-cust262 kernel: agpgart: Found an AGP 2.0
compliant device at 0000:00:00.0.
Dec 18 09:08:58 spc1-burn4-0-0-cust262 kernel: agpgart: Putting AGP V2
device at 0000:00:00.0 into 2x mode
Dec 18 09:08:58 spc1-burn4-0-0-cust262 kernel: agpgart: Putting AGP V2
device at 0000:01:00.0 into 2x mode
Dec 18 09:08:58 spc1-burn4-0-0-cust262 dhcdbd: message_handler: message
handler not found under /com/redhat/dhcp/eth0 for sub-path
eth0.dbus.get.host_name
Dec 18 09:08:58 spc1-burn4-0-0-cust262 dhcdbd: message_handler: message
handler not found under /com/redhat/dhcp/eth0 for sub-path
eth0.dbus.get.domain_name
Dec 18 09:08:58 spc1-burn4-0-0-cust262 dhcdbd: message_handler: message
handler not found under /com/redhat/dhcp/eth0 for sub-path
eth0.dbus.get.nis_domain
Dec 18 09:08:58 spc1-burn4-0-0-cust262 dhcdbd: message_handler: message
handler not found under /com/redhat/dhcp/eth0 for sub-path
eth0.dbus.get.nis_servers
Dec 18 09:09:14 spc1-burn4-0-0-cust262 gconfd (mikef-2757): starting
(version 2.16.0), pid 2757 user 'mikef'
Dec 18 09:09:14 spc1-burn4-0-0-cust262 gconfd (mikef-2757): Resolved address
"xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration
source at position 0
Dec 18 09:09:14 spc1-burn4-0-0-cust262
Comments appreciated
Hugo
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a
subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
_________________________________________________________________
Think you're a film buff? Play the Movie Mogul quiz and win fantastic
prizes! http://www.msnmoviemogul.com
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]