Hello,
I have an intel 3945 wireless card, installed wpa_supplicant (via apt-get, debian etch installation). I want to use it with my dlink router but i am not able to use WPA. The configuration for WEP works, but for WPA I never get an ip address from the DHCP server. This is my /etc/network/interfaces configuration: iface eth2 inet dhcp wpa-driver wext wpa-conf /etc/network/wpa_home.conf then, my /etc/network/wpa_home.conf ctrl_interface=/var/run/wpa_supplicant ctrl_interface_group=0 eapol_version=1 ap_scan=2 fast_reauth=1 network={ ssid="ZWERVELWPA" proto=WPA key_mgmt=WPA-PSK pairwise=TKIP psk="1234567890" # psk=b77c11d7a3bdd1b1f19e06c2b26128b25ba51719d165e557335157822bb8affc priority=5 } Via iwconfig I can see that eth2 is the right essid. If I configure it for WEP, then it works but not via WPA To start I type : Ifup eth2 Is that correct to start like that ? please help, how can I make WPA working. Thnx, Phil. Disclaimer : This e-mail is intended for the exclusive use by the person(s) mentioned as recipient(s). If you are not the intended recipient, please notify us immediately. This e-mail does not constitute any commitment for Sea-Ro Terminal N.V. or its subsidiaries except when expressly otherwise agreed in a written agreement between the intended recipient and the originating subsidiaries of Sea-Ro Terminal N.V. Sea-Ro Terminal and each of its subsidiaries each reserve the right to monitor all e-mail communications through its networks. This mail has been checked for viruses by Symantec and Trend Micro.