Franck Joncourt <[EMAIL PROTECTED]> wrote: ...snip... | | To me, it looks like a driver probleme as you mentionned above about the | message you got at boot time. | After changed the order of the cards, the 3com card and the others woks perfectly. So it's not the card nor the driver. It's always eth2 who's i can't get up ! what card it is. an lspci extract : 00:09.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74) 00:0b.0 Ethernet controller: Accton Technology Corporation SMC2-1211TX (rev 10) 00:0f.0 Ethernet controller: VIA Technologies, Inc. VT86C100A [Rhine] (rev 06) An lsmod: mii 5536 3 via_rhine,8139too,3c59x ( correct drivers loaded) A cat /proc/interrupts: 0: 1264052 XT-PIC-XT timer 1: 1135 XT-PIC-XT i8042 2: 0 XT-PIC-XT cascade 9: 0 XT-PIC-XT uhci_hcd:usb1 10: 0 XT-PIC-XT eth1 11: 1613 XT-PIC-XT eth0 14: 2288 XT-PIC-XT ide0 15: 109 XT-PIC-XT ide1 ( eth2 isn't there ?? ) Extract from dmesg : eth2: VIA Rhine at 0x1ec00, 00:80:c8:ec:92:b5, IRQ 12. eth2: MII PHY found at address 8, status 0x7809 advertising 05e1 Link 0000.
Any hint would be CERY welcome. best regards mess-mate -- You will be called upon to help a friend in trouble. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]