On Sun, Apr 01, 2007 at 06:01:56PM EDT, Mark Grieveson wrote: > On Sun, 2007-04-01 at 13:01 -0400, cga2000 wrote: > > Has anybody gotten direct rendering to work with the legacy mach64 > > Rage Pro Mobility card .. with the etch version of Xorg? > > > > The ATI web site does not provide drivers for this antique so I'll > > have to use the one that's provided with Xorg. > > > > $ lspci > > > > [..] ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64) > > I did manage to get this working with a former linux kernel image of > Etch, but I've had no luck with the more recent kernel image of Etch.
Would that be 2.4.27? That's what I'm running on sarge. > Anyway, how I did get it working was by installing a driver from > http://dri.freedesktop.org/snapshots/ > > Specifically, I installed this: > > http://dri.freedesktop.org/snapshots/mach64-20060403-linux.i386.tar.bz2 > > It has an easy to use install script. Sounds familiar .. I remember running a script that made everything very simple. But I need a recent 2.6 kernel in etch for other purposes. Currently, I'm at 2.6.20. Thanks much, cga -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
