Wackojacko wrote:
Joe Hart wrote:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
John L Fjellstad wrote:
Joe Hart <[EMAIL PROTECTED]> writes:
Now that is a good reason. AFAIK, as of the newer kernels (forget
which release) all drives are now sdX, so this issue becomes moot. I
can see why UUID is a good idea, but a LABEL is much easier to read.
Well, my Kubuntu system runs 2.6.20 and havs everything as sdX (when it
was hdX before), and my Debian system runs 2.6.18 and still has hdX,
some somewhere in-between.
Problem with labels is if the label is not set at format time, what
should the system set the label as? Some random string? Label is not a
required setting when you format the partition.
Yes, I believe it is the 2.6.20 that changed it.
Now, I run a self compiled kernel and still have a HDD showing up as
hdc. However, I did notice that there were new experimental ATA/SATA
drivers in the kernel, which I also compiled in, but maybe the kernel is
still using the old drivers? Time for and experiment I think :).
Wackojacko
Having removed all the ide related stuff from my config and recompiling,
the pata_amd module now controls the ide controller (it was blocked by
the ide stuff previously according to dmesg). And yes my backup HDD is
now sdb not hdc. So it is the transition to the new ATA drivers that
cause the name changed as suspected.
However, my DVD drives are no longer assigned a device node. They are
picked up in dmesg as SCSI drives
scsi4 : pata_amd
scsi5 : pata_amd
scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4163B A105 PQ: 0 ANSI: 5
scsi 4:0:1:0: CD-ROM MATSHITA DVD-ROM SR-8585F 2A25 PQ: 0 ANSI: 5
scsi 5:0:0:0: Direct-Access ATA Maxtor 6E040L0 NAR6 PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi disk sdb
sd 2:0:0:0: Attached scsi generic sg0 type 0
scsi 4:0:0:0: Attached scsi generic sg1 type 5
scsi 4:0:1:0: Attached scsi generic sg2 type 5
sd 5:0:0:0: Attached scsi generic sg3 type 0
and assigned sg1 and sg2 but these are not mountable. Ideas anyone?
Udev perhaps?
Thanks
Wackojacko
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]