Running Debian Etch. I've had this 6310 all in one Officejet working with Etch before but it
doesn't work after I installed Etch on a different machine. The printer has been working fine
with the previous Etch system and with Windows.
1. /usr/bin/hp-setup says:
([EMAIL PROTECTED]) ~>sudo hp-setup
HP Linux Imaging and Printing System (ver. 1.6.10)
Printer/Fax Setup Utility ver. 3.1
Copyright (c) 2003-6 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
0
error: Unable to connect to hpiod.
error: Unable to connect to HPLIP I/O. Please (re)start HPLIP and try again.
I have executed sudo /etc/init.d/hplip restart on numerous occasions, powered the 6310 printer
on and off, etc., still can't print or scan.
2. scanimage -L reports nothing to the terminal, but the following message appears in
/var/log/messages:
Jun 29 09:43:58 jupiter scanimage: unable to connect hpssd socket 3203: Connection refused:
prnt/hpijs/hplip_api.c 719
3. Desktop / Administration / Printing / New Printer detected the Officejet 6310, but the test
page won't print due to an error. The gnome-cups-manager utility status window shows Stopped:
job-stopped for the test page.
4. Detection messages from /var/log/message:
Jun 29 09:37:54 jupiter kernel: Vendor: HP Model: Officejet 6310
Rev: 1.00
Jun 29 09:37:54 jupiter kernel: Type: Direct-Access
ANSI SCSI revision: 02
Jun 29 09:37:54 jupiter kernel: sd 19:0:0:0: Attached scsi removable disk sda
5. Below is the output of dpkg -l \*hp\* if that will help:
([EMAIL PROTECTED]) ~>dpkg -l \*hp\*
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
||/ Name Version Description
+++-========================-========================-================================================================
ii foomatic-db-hpijs 20061031-1 linuxprinting.org printer support -
database for HPIJS driver
un hp-ppd <none> (no description available)
ii hpijs 2.6.10+1.6.10-3 HP Linux Printing and Imaging - gs IJS
driver (hpijs)
ii hpijs-ppds 2.6.10+1.6.10-3 HP Linux Printing and Imaging - HPIJS PPD
files
ii hplip 1.6.10-3 HP Linux Printing and
Imaging System (HPLIP)
un hplip-base <none> (no description available)
ii hplip-data 1.6.10-3 HP Linux Printing and
Imaging - data files
un hplip-doc <none> (no description available)
un hplip-ppds <none> (no description available)
un hpoj <none> (no description available)
un not+hppa <none> (no description available)
This printer has previously worked with Etch, as I said earlier.
======Keith
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]