Hi, I've installed a Debian unstable on a Intel ICH8 RAID 1. It's a little bit different but I think you may find this helpful:
http://blog.mc-thias.org/index.php?title=debian_installation_on_fakeraid_sata_rai&more=1&c=1&tb=1&pb=1 Hope this can help you ;-) Cheers, On Fri, Jul 06, 2007 at 09:58:38PM +0200, csanyipal wrote: > Hello! > > I want to install Debian Etch on my new box with motherboard that has for > the storage the nvidia nForce 430i chipset. This chipset support RAID > 1 configuration. > > I want to install Etch on two SATA disk with the hardware RAID 1 > setup. > > I setup in the BIOS the RAID 1 for these disks. I have only these two > disks (2 x 320 GB) in the box. > > I want to use the downloaded debian-40r0-i386-CD-1.iso for this > installation. > > Will Etch recognize the RAID 1 BIOS setup during the installation? > > I find on the internet documentation about hardware RAID [1] but can't > find in there description about installing a GNU/Linux system on hw > RAID 1 out there. > > Can I install Etch on this nvidia hardware RAID 1, or perhaps should I > to install Etch with software RAID 1 on these two SATA disk? > > Any advices will be appreciated! > > [1] http://www.ram.org/computing/linux/dpt_raid.html > > -- > Regards, Paul Csányi > http://www.freewebs.com/csanyi-pal/index.htm > -- work hard, die young IT Stuff on http://blog.mc-thias.org Thias -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
