Le Wednesday 25 July 2007 01:46:03 Raj Kiran Grandhi, vous avez écrit : > Hi, > > I am trying to get "wake on lan" to work in Etch. I have a motherboard > with an onboard NIC which supports wake-on-lan. I have enabled > wake-on-lan in the bios. When I poweroff the computer during POST, I am > able to remotely wake it, but if I shut it down from Etch, power to the > NIC is also being turned off and wake-on-lan does not work. I have > edited '/etc/init.d/halt' and removed the '-i' option from the 'halt' > command, but the NIC is still being powered down.
Try to add this line in your /etc/network/interfaces : post-down ethtool -s eth0 wol g It tells your nic to prepare to be woken up, so perhaps it will not power off. Install ethtool if you don't have it.
signature.asc
Description: This is a digitally signed message part.
