Hi I'm having problem with my AMD Athlon64 X2 3800+ and the 2.6.18-4-xen-vserver-amd64 kernel.... I installed my Etch with the standard 64bit 2.6.18-4 kernel and then i installed the 2.6.18-4-xen-vserver-amd64. Then both cores on the CPU where visible under /proc/cpuinfo and htop. And I setup Dom0 and DomU's. But due to other problems, i upgraded the BIOS on the Asus M2NPV-MX motherboard. Now both cores is located, but not proper setup when booting the xen kernel.
-------- 2.6.18-4-xen-vserver-amd64 -------- # dmesg | grep CPU Initializing CPU#0 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Brought up 2 CPUs Initializing CPU#1 -------- 2.6.18-4-amd64 ------------------ # dmesg | grep CPU SMP: Allowing 2 CPUs, 0 hotplug CPUs Initializing CPU#0 CPU 0: aperture @ d030000000 size 32 MB CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Initializing CPU#1 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU 1: Syncing TSC to CPU 0. CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 482 cycles) Brought up 2 CPUs --------------------------------------------- I have looked at xen boot options, but that didn't change the outcome. /Lars -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]