I installed the newest and probably last Oralux KNOPPIX distribution from a live CD to the hard disk on a laptop and it almost works right. I must not have the right magic touch because I needed to add 2 more startup scripts in /etc/rc2.d in order to start a software speech synthesizer and to start sshd which I do want to enable on bootup for remote login capability. Neither script starts on its own during the run-level 2 phase of booting though all other scripts with higher as well as lower sequence numbers do successfully start. The only thing these 2 starts have in common is that I put them there. One references ../init.d/ssh which was already sitting in /etc/init.d. I figured the link wasn't there as a security measure because you don't need sshd if you don't want remote logins from other hosts.
The other references ../initd/speechd-up which starts the software synthesizer. Both scripts are executable and will start and run perfectly after the system boots and one su's to root and manually starts them, but they act as if they aren't even there when they should be starting. I even made a third script called got_this_far which does absolutely nothing but echo a line to standard output. The boot process misses that one also. By testing the scripts, I call them the way init would /etc/rc2.d/S20ssh start That works every single time I call it manually. Any suggestions on how to see inside the logic that is keeping these 3 scripts from running? Thank you. Martin McCormick WB5AGZ Stillwater, OK Systems Engineer OSU Information Technology Department Network Operations Group -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]