On Sunday 28 October 2007 18:03, Andrew Sackville-West wrote: > On Sun, Oct 28, 2007 at 05:21:52PM +0100, Bruno Costacurta wrote: > > Hello, > > > > I installed Debian Etch but have no sound at all. > > Previous Fedora installation gave sounds so probably my Etch is missing > > some setup. > > there are several possible things: > > 1. you aren't in the audio group (adduser <you> audio, log out and > back in). Already fine for user in group audio.
> > 2. your mixer is set to 0 volume. run alsamixer and review all the > settings. Same. Volume was set. > > 3. despite the apparently correct modules being inserted, sometimes it > just doesn't work out of the box. If the above things don't work, > you could try modprobe -r all the sound modules, then do a > udevtrigger to reload them and see what happens. Followed these instructions. Fine to remove all module snd_xxx or soundcore with 'modprobe -r' but following 'udevtrigger --verbose' seems to give no useful info. > > if none of the above help, post back up as there are several people > who are very adept at solving sound issues here. > > A -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]