Joe Emenaker wrote:
John Miller wrote:
Nate Duehr wrote:
Bob wrote:
... what I'm looking for is a drivebay / backplane
manufacturer that has 5, 4, 3 and 1 slot internal bays available
that use the *same* tray / housing / caddie.
I've got about 4-5 rackmount servers using the Addonics 3-drive units.
They also make 4-drive and 5-drive units that look like they use the
same trays.
Pros:
- Just about the cheapest I've seen
- The cage has power buttons for each drive so that you can turn off
power to unused drives (or for simulating a crash to test your RAID?).
- The tabs that release the drives are smooth and *just* tall enough
to put a 1/2" Brother P-Touch sticker on the front for labeling.
- Built-in over-temp alarm with reset button on the front.
Cons:
- In order to fit the drives in that tight, you have to use the screws
that they provide you with (so, don't lose them) which have really
flat, really thin heads.
- There's a release-lock for each tray (which is good), but it's kinda
tricky to engage the lock without actually triggering the release lever.
I should note that the cons are very slight inconveniences... no big
deal at all.
Lately, I've been trying out StarTech's trayless cages and those work
nicely as well. No trays, no screws... you just open the door, slide
the drive in, and close the door. If you can operate a refrigerator,
you can operate these cages.
Both the Addonics and Startech have yet to fail on me... and I think
I've had the 4 Addonics in place for about 2 years now.
You complete star, book marked both of them, StarTech does tray-less
bays in 1, 3 & 4 drive capacities, no 5 as yet but it may come or I may
not need it, assuming I can find them in Singapore they will be perfect.
Thank you for your help.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]