On Sun, Jan 06, 2008 at 02:53:57PM -0500, S Scharf wrote: > I installed a new disk and am trying to create a one disk raid 1 on it > (and will add the second disk later) > > but when I run mdadm I get the followng: > > $ sudo mdadm --create /dev/md0 --level=raid1 --raid-devices=2 /dev/sda3 > missing > mdadm: /dev/sda3 is too small: 0K > mdadm: create aborted
I'm just guessing here, since I set up my raid1 when I installed Etch, but you told it raid1 and you told it to use two devices but you only gave it one device. What happens if you use --raid-devices=1? Doug. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]