Martin Marcher wrote: > we own an areca 1210 and currently have a RAID5 with 4x250GB. As disk > space is low we'd like to replace it with 4x1000GB. > > We already found a supported disk, hotpluggable, etc. > > Now after subsequently replacing the drives how can we expand the RAID set > to a net of 3TB (the controller does support sets that large). I scanned > the manual and FAQ at areca but couldn't find any pointer on how we would > go about that. > > Anyone been there done that?
To answer myself and for the reference of someone else: You need to update the firmware to at least: V1.43 2007-4-17 Then get the archttp from the areca site (get the newest!) after that you can "RESETCAPACITY Raid Set # 00" enter in the "Rescue Raid Set" screen. It will recognise the new sizes. Proceed as normal (add VolumeSets, expand a volumeset whatever...) hope it saves someone some time... -- http://noneisyours.marcher.name http://feeds.feedburner.com/NoneIsYours You are not free to read this message, by doing so, you have violated my licence and are required to urinate publicly. Thank you. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]