Hello!
ifconfig don't list interfaces on my Debian Etch system.
sudo ifconfig
eth0 Link encap:Ethernet HWaddr 00:E0:7D:FC:1A:B2
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::2e0:7dff:fefc:1ab2/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:468 (468.0 b)
Interrupt:10 Base address:0xdc00
eth1 Link encap:Ethernet HWaddr 00:E0:7D:FC:1A:B0
inet addr:192.168.2.1 Bcast:192.168.2.255 Mask:255.255.255.0
Érvénytelen utasítás
^^^^^^^^^^^^^^^^^^^^
This is on hungarian and mean something like:
invalid command
If I run this command again, I get another error message,
shorter:
$ sudo ifconfig
eth0 Link encap:Ethernet HWaddr 00:E0:7D:FC:1A:B2
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
Érvénytelen utasítás
^^^^^^^^^^^^^^^^^^^^
invalid command
ans so on. I get the 1. or the 2. message, if I iterate
this command.
Why this happen?
I have changed my ethernet cards today and have
difficulties with my interfaces because of udev.
udev remarks ethernet cards..
I have besides this another problem.
I cant set up on my home network dhcp3-server so
that the dhcp3-server give a fixed address to my
debian-server system on my DMZ subnet.
The same setup works fine before I remove and
reconfigure ethernet cards on my gatewai/router.
Any advices will be appreciated!
--
Regards, Paul Csanyi
http://www.freewebs.com/csanyi-pal/index.htm
