2008/4/14, Fabrizio Lippolis <[EMAIL PROTECTED]>: > I am trying to install Debian etch on a Compaq Proliant ML350. During the > installation process some hardware is recognized, the network card too, and > gets an IP address from the DHCP server. Before partitioning, a message > appears saying that the installation procedure can't find the disks and asks > to choose a driver. The machine has an Adaptec SCSI RAID controller > configured as RAID 5 with 3 disks connected to it. I tried to choose some > options, no way to go further. There is already a Debian installation on > this machine, so Debian works, but it's a woody with a 2.4 kernel. Now I > want to format and start with a clean Debian installation. Moreover I have > installed etch on more modern HP servers without problems. Any suggestion to > complete the installation on this machine? >
if you won't install etch by net-ist, try to set up the network and the card network after the installation. regards, -- "all programs at word don't substitute human brain" Rashna Micaela Gallerini -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
