On my Centos box i also had to do the following to get it to work: ethtool -s eth0 wol g echo PCI1 > /proc/acpi/wakeup
cat /proc/acpi/wakeup Device Sleep state Status PCI0 4 enabled PCI1 4 enabled PCI2 4 enabled UAR1 4 disabled UAR2 4 disabled USB0 4 disabled USB1 4 disabled AC97 4 disabled On Sun, 20 Apr 2008 15:15:10 +0530 Raj Kiran Grandhi <[EMAIL PROTECTED]> wrote: grajkiran> Paul Csanyi wrote: grajkiran> > Hello! grajkiran> > grajkiran> > I have a small network at home. grajkiran> > grajkiran> > I want to setup the gateway/router Debian Etch to wake up the server box with grajkiran> > wakeonlan. grajkiran> > grajkiran> > The server box - Debian Etch has enabled the "Resume on LAN" field in grajkiran> > the Power Management Setup of the Award BIOS. grajkiran> > grajkiran> > The server box have also a NIC with wake on LAN cable properly set up. grajkiran> > grajkiran> > When I run the command wakeonlan the server box wan't not to wake up. grajkiran> > grajkiran> > I use the right MAC address of the servers NIC in this command. grajkiran> > grajkiran> > Why can't I use wakeonlan to bring up the server from the gateway? grajkiran> > grajkiran> > Any advices will be appreciated! grajkiran> > grajkiran> grajkiran> You have to ensure that the network card is not powered down when the grajkiran> system is shut down. After shutdown, check whether the LEDs of the grajkiran> ethernet adapter are on. If not you may have to use `ethtool` to ensure grajkiran> that the ethernet card is not powered down. grajkiran> grajkiran> I use `ethtool -s eth0 wol g` to achieve this. grajkiran> grajkiran> grajkiran> -- grajkiran> Raj Kiran Grandhi grajkiran> -- grajkiran> Politics is for the moment. An equation is for eternity. grajkiran> -- Albert Einstein grajkiran> grajkiran> grajkiran> -- grajkiran> To UNSUBSCRIBE, email to [EMAIL PROTECTED] grajkiran> with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] grajkiran> -- Test <[EMAIL PROTECTED]> -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]