El 21/05/2008, a las 21:56, Hugo Vanwoerkom escribió:
Florian Kulzer wrote:
On Wed, May 21, 2008 at 13:45:19 +0200, Santi Saez wrote:
Dear Srs,
I need to get the CPU temperature in a Supermicro X6DH8-XG2
motherboard, this is the link for key features:
http://www.supermicro.com/products/motherboard/Xeon800/E7520/
X6DH8- XG2.cfm
[...]
# modprobe -l | grep lm93
# modprobe lm93
FATAL: Module lm93 not found.
Are you using Etch? The 2.6.18 kernel does not have this module. I
think
you need at least 2.6.23.
http://www.lm-sensors.org/wiki/Devices
says you need 2.6.20
Thanks all for your replys :-)
I upgrade to Linux 2.6.25.4 and lm-sensors 3.0.2-1 and now I can get
values from LM93 chip, example output:
===============================================================
# sensors
lm93-i2c-0-2e
Adapter: SMBus I801 adapter at 1100
in1: +0.94 V (min = +0.83 V, max = +1.02 V)
in2: +0.94 V (min = +0.83 V, max = +1.02 V)
in3: +0.94 V (min = +0.83 V, max = +1.02 V)
in4: +1.21 V (min = +1.08 V, max = +1.32 V)
in5: +1.49 V (min = +1.35 V, max = +1.66 V)
in6: +1.50 V (min = +1.35 V, max = +1.66 V)
in7: +1.35 V (min = +1.02 V, max = +1.54 V)
in8: +1.36 V (min = +1.02 V, max = +1.54 V)
in9: +3.35 V (min = +2.97 V, max = +3.64 V)
in10: +5.04 V (min = +4.47 V, max = +5.49 V)
in11: +0.00 V (min = +2.25 V, max = +2.76 V)
in12: +1.79 V (min = +1.77 V, max = +2.17 V)
in13: +1.19 V (min = +0.89 V, max = +1.09 V)
in14: +0.97 V (min = +0.89 V, max = +1.09 V)
in15: +0.30 V (min = +0.07 V, max = +0.54 V)
in16: +3.41 V (min = +2.97 V, max = +3.63 V)
fan1: 0 RPM (min = 0 RPM)
fan2: 0 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
temp1: +33.0°C (low = -128.0°C, high = -128.0°C)
temp2: +35.0°C (low = -128.0°C, high = -128.0°C)
temp3: +27.0°C (low = -128.0°C, high = +50.0°C)
cpu0_vid: +1.088 V
cpu1_vid: +1.088 V
===============================================================
But I think that this chipset is not fully supported in lm-sensors
already, I do not know what temperatures refences temp1, temp2 and
temp3 params.. maybe physical processors and mother board.. I will
ask in the m-sensors mailing list..
There's no way to get thermal information information via ACPI in
this motherboard? I get this error when running "acpi":
# modprobe thermal
# acpi --thermal
No support for device type: thermal
Regards,
--
Santi Saez
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]