On Tue, Jul 01, 2008 at 11:52:23AM +0930, Dale wrote: > 2008/7/1 Martin Kraus <[EMAIL PROTECTED]>: > > Hi, > > I'm trying to get Hauppauge Nova-T 500 Dual DVB-T (ID 2040:9950) to work on > > lenny. The driver and firmware loads but I get > > > > dvb-usb: no frontend was attached by 'Hauppauge Nova-T 500 Dual DVB-T' > > > > and /dev/dvb/adapter0 is missing frontend0 device which I found out is quite > > important:) > > Did anyone get this card to work? I've googled like hell but to no end. > > Hi Martin, > > Is the module getting loaded correctly, can you check to see if it > shows up under 'lsmod'. you may have to manually load the module and > if that works put the module in to the '/etc/modules' file for it to > be automatically loaded at boot time. > > And you might have to load the module with some options eg 'modprode > <module> card=<number> tuner=<number>' and then if that works create a > '/etc/module.d/<module> file with the relevant info in it.
the module loads correctly even the firmware looks ok. it just doesn't load any frontend driver. I've found a few people having the same problem but couldn't find any solution. this card should be ok but there's so many revisions that I might just have the screwed up one. mk -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]