> > Using 2.6.24-1-686, my two IDE-connected cd/dvd drives are detected > > as /dev/sr0 and /dev/sr1, symlinked to cdrom0 and cdrom1, and work > > perfectly. When I boot 2.6.25-2-686-bigmem, no entries for these > > devices appear in /dev.
<snip dmesg and lsmod output> > I'm not sure this is relevant but when I modinfo on ide_cd_mod it > shows : > > filename: /lib/modules/2.6.25-2-686/kernel/drivers/ide/ide-cd_mod.ko > license: GPL > alias: ide-cd > alias: ide:*m-cdrom* > description: ATAPI CD-ROM Driver > depends: ide-core,cdrom > vermagic: 2.6.25-2-686 SMP mod_unload 686 > parm: ignore:charp > > Note the description : *ATAPI* CD-ROM Driver. In the dmesg of your > bigmem kernel your drivers seems to be recognize as SATA, not ATAPI. > > There's nothing about GSA-H55L in your dmesg ? Because on your normal > kernel there is the name of the drives, not in the bigmem kernel. Is > the lspci output the same for both kernels ? > > Thomas Preud'homme Thanks for your reply. GSA-H55L doesn't appear in dmesg for the bigmem kernel, nor do any references to DVD drives. Both appear when booting 2.6.4-1-686. Comparing outputs of lspci for the two kernels, there is a difference for the following device: 03:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 8 Subsystem: ASUSTeK Computer Inc. Device [1043:82a2] In the standard issue kernel, lspci reports: Kernel driver in use: pata_marvell Kernel modules: pata_marvell But the bigmem kernel: Kernel driver in use: ahci Kernel modules: ahci, pata_marvell Might this be the issue? I tried adding ahci to /etc/modprobe.d/blacklist and rebooting the bigmem kernel, but the dvd devices are still not detected. -- Joe Hickey -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]