On Sat, Aug 02, 2008 at 09:42:54PM +0200, Helmut Neumeier wrote: > today i have refresh my debian etch system and now the serial port is no > longer working i get no data from the port, maybe the problem is comming > from the libc6 because this one was also updated. > when i boot with knoppix everything is working the hardware is ok. > > kernel 2.6.18-6-686 > libc6 2.3.6.dsl-13etch7 > > cat /proc/tty/driver/serial > serinfo:1.0 driver revision: > 0: uart:16550A port:000003F8 irq:4 tx:0 rx:0 > 1: uart:unknown port:000002F8 irq:3 > 2: uart:unknown port:000003E8 irq:4 > 3: uart:unknown port:000002E8 irq:3 > > dmesg|grep 8250 > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > > PC= Toshiba T9000
What is no longer working? Your external modem? What error messages are you seeing? -- Chris. ====== "One, with God, is always a majority, but many a martyr has been burned at the stake while the votes were being counted." -- Thomas B. Reed -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]