On Tuesday 05 August 2008 21:59, Alexander wrote: > I want create my debian home router: > |"dslmodem" wan ppp0|<-->|eth0<-->(eth1,eth2 - shaping router)|<---|"lan" > | comp1,comp2| > > I've created some configurations: > ------------------------------------------------------------------------ > 1. /etc/network/interfaces > > # This file describes the network interfaces available on your system > # and how to activate them. For more information, see interfaces(5). > > # The loopback network interface > auto lo > iface lo inet loopback > > # The primary network interface > > #allow-hotplug eth0 > auto eth0 > iface eth0 inet static > address 192.168.1.3 > netmask 255.255.255.0 > network 192.168.1.0 > broadcast 192.168.1.255 > gateway 192.168.1.1 > # dns-nameservers 192.168.1.1 > > #allow-hotplug eth1 > auto eth1 > iface eth1 inet static > up /sbin/wondershaper eth1 320 320 > down /sbin/wondershaper remove eth1 > address 192.168.1.4 > netmask 255.255.255.0 > # network 192.168.1.0 > # broadcast 192.168.1.255 > > #allow-hotplug eth2 > auto eth2 > iface eth2 inet static > up /sbin/wondershaper eth2 320 320 > down /sbin/wondershaper remove eth2 > address 192.168.1.5 > netmask 255.255.255.0 > # network 192.168.1.0 > # broadcast 192.168.1.255 > > ------------------------------------------------------------------------ > 2. /etc/init.d/iptables.sh > > # !/bin/sh > iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE > > ------------------------------------------------------------------------ > 3. /etc/sysctl.conf > net.ipv4.conf.default.forwarding=1 > ------------------------------------------------------------------------ > > But it's not working yet, maybe somebody know why and can help me.
Hi. "not working" is a vague statement. I don't know about networking so I can't help specifically. Just give us more info on what's not working. -- Shachar Or | שחר אור http://ox.freeallweb.org/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]