Hello, i am trying to perform a network install with Debian Installer, which is failing when installing the GRUB loader with
"Unable to install GRUB in (hd0)" Executing 'grub-install (hd0)' failed. and in the console i see: Cannot find a GRUB drive for /dev/sdq2. Check our device.map. error: Running 'grub-install --no-floppy --recheck "(hd0)"' failed. The problematic system: IBM woodcrest blade with Intel 5000P chipset, "LSI Logic/Sym bios Logic SAS1064ET PCI-Express-MPT SAS" SCSI controller, Qlogic ISP2422-based 4Gb FC adapter with several SAN Luns attached (that why the local disk appears as /dev/sdq...) The partition table: cat /proc/partitions major minor #blocks name (... ram0 to ram15 here...) 65 0 71687000 sdq 65 1 8474256 sdq1 (swap) 65 2 6000277 sdq2 (/ ) 65 3 57207465 sdq3 (unmounted) I also tried to run grub-install by hand from the rescue/debug shell, # grub-installer '(hd0)' Wrong number of args: mapdevfs <path> The same error happens when trying with any other hd number (including (hd15), (hd16) etc) and with the --recheck options. I tried to intercept and log into a file the parameters mapdevfs is getting but i also don't get any. Lilo DID install without problems on the MBR. Where could be the problem? I couldn't find anything relevant after a lot of searching in google and in the debian lists. Thanks for any tip! (PS: Please CC me directly as i am currently not subscribed.) Ariel -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]