Wayne Topa wrote: > Jonathan Kaye wrote: >> Wayne Topa wrote: >> >> >>> If it came with WindBloz did it include a CD with software for that >>> card? Does it have any software for that card installed? Did the card >>> work in WindBloz? If you have WindBloz software for it you might get it >>> working using the ndiswrapper package. >>> >> Hi again Wayne, >> On the Acer website they do have the Windows XP driver for the Aspire >> 3500. It's called Atheros Wireless LAN B+G Driver 4.0.0.14001. I can give >> it a try with ndiswrapper. >> Cheers, >> Jonathan > > Sure you can. Get that and the ndiswrapper (which I have not used) and > go for it!! > > Good Find Jonathan!! > > Wayne More info: 1. dmesg results seem to be good: [ 14.270854] ndiswrapper version 1.53 loaded (smp=yes, preempt=no) [ 14.358992] ndiswrapper: driver net5211 (,11/15/2006,5.1.1.9) loaded [ 14.359358] ndiswrapper 0000:00:0b.0: enabling device (0010 -> 0012) [ 14.359593] ndiswrapper (ZwClose:2198): closing handle 0xf78975a8 not implemented [ 14.969994] ndiswrapper: using IRQ 17 [ 15.196018] usbcore: registered new interface driver ndiswrapper [ 15.186802] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK 2. ifconfig seems more like you described. Entries only for eth0, lo and wlan0. wlan0 looks like this: wlan0 Link encap:Ethernet HWaddr 00:0e:9b:cf:bc:0c UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 Memory:e2010000-e2020000 Cheers, Jonathan -- Registerd Linux user #445917 at http://counter.li.org/
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]